SATSFYD Posted November 22, 2013 Share Posted November 22, 2013 Thanks again for the kit... I didnt think mine was going bad until I pulled the IC out... The IC had a cracked tab where the IC connects to the turbo compressor housing. I could not believe it. Because my 2006 GT has only 77,000 miles on it. (I even took a picture for posting if I need to.) Thanks again for the kit. It was quick and easy to put in/on. **There are two types of people in the world, those who build horsepower and those who buy it. Which one are you? Link to comment Share on other sites More sharing options...
scontivt Posted February 5, 2014 Share Posted February 5, 2014 Thanks for designing this kit. Saved my stock TMIC. If I wasn't on a time crunch, I would have bought the kit. Link to comment Share on other sites More sharing options...
SGT Daddy Posted February 10, 2014 Share Posted February 10, 2014 Glad I got the kit. Glad it had the extra SS zip tie, we broke one putting it in. Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted February 10, 2014 Moderators Share Posted February 10, 2014 Glad I got the kit. Glad it had the extra SS zip tie, we broke one putting it in. Glad to hear! There's a reason why I put an extra tie in with each kit "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
I Donated bucko3the7man Posted February 10, 2014 I Donated Share Posted February 10, 2014 Glad to hear! There's a reason why I put an extra tie in with each kit Should have an extra 2... lol Link to comment Share on other sites More sharing options...
BoozeRS05 Posted February 10, 2014 Share Posted February 10, 2014 Yup, I broke one of them when installing as well. EB's Subaru journal - 2005 LegacyGT Wagon & 2014 Forester FB25 (2008 specB - RIP) IG@legacygtliving Link to comment Share on other sites More sharing options...
Lafta Posted March 19, 2014 Share Posted March 19, 2014 A total gentleman was BarManBean/Mike, in answering my questions re. the kit. Any queries you may have for him....ask away! Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted March 19, 2014 Moderators Share Posted March 19, 2014 ^Thanks! Another kit went out today. Kits are in stock and shipping. "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
Zac88 Posted April 16, 2014 Share Posted April 16, 2014 Just ordered, thanks! Link to comment Share on other sites More sharing options...
Dade Posted April 20, 2014 Share Posted April 20, 2014 Hey BarMan, what's the P/N for the BPV hose clamp? I need one for my WRX. Think I can buy one from you or get the P/N? Thanks! Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted April 21, 2014 Moderators Share Posted April 21, 2014 p/n is 092311502. I don't get a deal on them or anything, just pick 'em up at the dealer. If you can't source one locally just let me know and I can put one in the mail for you. "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
Dade Posted May 6, 2014 Share Posted May 6, 2014 p/n is 092311502. You're the man. Typing this into my local Subaru online parts catalog produced the correct clip. I really appreciate it. It should be standard issue for any Subaru BPV in my opinion. Link to comment Share on other sites More sharing options...
zzztech13 Posted May 10, 2014 Share Posted May 10, 2014 Just ordered my kit. Thanks!!!! will be going on before my Dyno Tune for 20g. Link to comment Share on other sites More sharing options...
Jyang5000 Posted May 31, 2014 Share Posted May 31, 2014 Pre clamp the end tank tabs before installing the rail. It will make the rail install easier. Link to comment Share on other sites More sharing options...
I Donated Too laff79 Posted June 1, 2014 I Donated Too Share Posted June 1, 2014 2 yrs with this mod at stg 2 and 18.5 lbs of boost...still going strong. Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted June 3, 2014 Moderators Share Posted June 3, 2014 2 yrs with this mod at stg 2 and 18.5 lbs of boost...still going strong. Great to hear! Yours was the first official BMB kit to go out, after all "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
SeeeeeYa Posted June 3, 2014 Author Share Posted June 3, 2014 2 yrs with this mod at stg 2 and 18.5 lbs of boost...still going strong. Great to hear! Yours was the first official BMB kit to go out, after all Indeed great to hear!! To my knowledge, the BP Mod has remained 100% reliable since the first shipped more than four years ago. While the mod itself was designed to provide such reliability, it also speaks for the diligence of those who install them. Keep it up! Link to comment Share on other sites More sharing options...
TheBlackPearl Posted June 7, 2014 Share Posted June 7, 2014 I tell people about the BP kit every chance that I get :-) I've been at like 19 psi for 6 months now and have not had a single problem. Thanks again Seeya and BMB Self proclaimed PNW Craiglist find of the day Champion, April 2014. Link to comment Share on other sites More sharing options...
Farfrumwork Posted July 23, 2014 Share Posted July 23, 2014 And the OG zip-tied BPTMIC is still kicking it! 2.25yr past install and just about 2 years on a Stg2 Cryo road-tune and all is still solid. Buy or build your own and forget about it. [From March 2012] Farfrumwork's metal zip-tie method (THE original metal zip-tied BPTMIC). No interference with BPV tube or engine cover. ~$30 total (with 3 SS ties and a bunch of AL channel left over...) Those are stainless cable ties. 33" length, trimmed up after install. I have PN's and new channel dimensions I can add later in an edit (papers out in the car). I ran a ~.015" deep, 3/16" wide slot down the length of each rail to capture the SS tie. The locking feature on the SS ties allows for some slack, so I had to tension and then "set" the ball (read, hit with a hammer to deform housing and lock in-place). You have to feed and form the SS tie around the rails to get a snug fit; it doesn't have to apply force to the rails, it just has to hold them on - any movement of the rails will only tighten the SS ties hold. I did JB the rails to the IC, but that's not necessary or required, the ties will not fail (100lb load rated). If anything goes wrong in the future I will let everyone know. I'm not too proud to admit failure, but it doesn't happen too often (again, nevermind the heatshield ) -Chad OTS stg2 - protune ASAP!! And they said, why overthink it? http://legacygt.com/forums/attachment.php?attachmentid=115236&stc=1&thumb=1&d=1333144916 Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted July 23, 2014 Moderators Share Posted July 23, 2014 And the OG zip-tied BPTMIC is still kicking it! 2.25yr past install and just about 2 years on a Stg2 Cryo road-tune and all is still solid. Buy or build your own and forget about it. [From March 2012] Good stuff! "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
prodrifterx Posted July 25, 2014 Share Posted July 25, 2014 Definitely like the heat shield and reflective tape addition to it. Link to comment Share on other sites More sharing options...
skibum0203 Posted September 18, 2014 Share Posted September 18, 2014 Sorry if I missed it but will this mod work/fit my 2005 outback xt ? Thanks! Link to comment Share on other sites More sharing options...
Chris GTO TT Posted September 18, 2014 Share Posted September 18, 2014 Yeah, order it now 2003 Baja 5MT 2016 Outback 2.5i Premium w/Eyesight Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted September 18, 2014 Moderators Share Posted September 18, 2014 Sorry if I missed it but will this mod work/fit my 2005 outback xt ? Thanks! Sure will "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
Rhitter Posted September 20, 2014 Share Posted September 20, 2014 And the OG zip-tied BPTMIC is still kicking it! 2.25yr past install and just about 2 years on a Stg2 Cryo road-tune and all is still solid. Buy or build your own and forget about it. [From March 2012] http://legacygt.com/forums/attachment.php?attachmentid=115236&stc=1&thumb=1&d=1333144916 What are you using for a heat shield on the left side of the intercooler? My OBXT build Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now