PhiTauFord Posted March 12, 2007 Share Posted March 12, 2007 So I'm attempting my HID install today and have everything figured out except for one connection on the wiring harness I have. The connector is green and looks like a male (two prong) electric plug. I have no idea where this connects. Can anyone tell me what this connector is and where I will connect it? Thanks! Link to comment Share on other sites More sharing options...
PhiTauFord Posted March 12, 2007 Author Share Posted March 12, 2007 * bump * The hood is up. Looking for where this green connector (looks like a male two prong electrical plug) goes? Link to comment Share on other sites More sharing options...
laz Posted March 12, 2007 Share Posted March 12, 2007 Did you buy an extra harness, if so pics. X --- Link to comment Share on other sites More sharing options...
PhiTauFord Posted March 12, 2007 Author Share Posted March 12, 2007 Thanks for the reply. praedet got me all straightend out. Off to do this install now. Thanks! Link to comment Share on other sites More sharing options...
BMac1203 Posted May 22, 2007 Share Posted May 22, 2007 Sorry to bring this thread back from the dead, but.... I finally got around to doing my RX330 retro today and got everything installed and wired...EXCEPT for the final connection from the new harness to the OEM low beam My harness is made to be able to keep the DRL functionality, but that shouldnt matter. Im wondering about the same connector (mine is actually an H7 connector I think?) The factory LB connector is a traingular 3 prong, which I have no way of plugging into my harness. OP, how did you get around/fix this? Im thinking I may need to tap/alter my harness a bit, but I really wanted to keep my OEM wires intact. So I figured Id ask here first. TIA Need a CarPC bezel? PM me! Link to comment Share on other sites More sharing options...
BMac1203 Posted May 23, 2007 Share Posted May 23, 2007 NVM Fixed my prob as well...now have to go out to aim them (RX330 retro today) Hopefully theyre good enough to get me to a flat surface/wall... Need a CarPC bezel? PM me! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.