speedracer76 Posted January 9, 2012 Share Posted January 9, 2012 Does anyone have a Tactrix cable I can borrow to use ecuflash to tune my car. I have the base map to go on and I can use learning view and RR with the VAG cable I have but ecuflash does not want to work with this cable. I'm in the Sacramento area. Thanks, Mike Link to comment Share on other sites More sharing options...
matt Posted January 10, 2012 Share Posted January 10, 2012 If you're ever in the SF or SJ area I can help you out with a reflash, though I'm not going to lend you my OpenPort 2.0. In the meantime place your order now for one of these: eBay search for vag-com kkl usb They can read and reflash the ECU on your 2006 LGT, in addition to logging. They usually ship from Asia so they'll take a couple weeks to arrive. If you already have such a cable you probably just need the right combo of drivers and software to make reflashing work. Link to comment Share on other sites More sharing options...
speedracer76 Posted January 10, 2012 Author Share Posted January 10, 2012 I already have a cable like that. VAG-com KKL. It will do learning view, RR just fine but no ecuflash. I have tried what seams like every combo of version, driver, even two completely different computers and all I get is no interface Karl 007 in the ecuflash log. Maybe someone that goes to the sacramento thursday night meets has a working cable I could try. Link to comment Share on other sites More sharing options...
matt Posted January 10, 2012 Share Posted January 10, 2012 I always had success with eBay cables using the latest EcuFlash (1.42 as of this writing) and the drivers it includes. Here are my usual instructions for Windows XP: Plug in the VAG-COM KKL cable. Open Device Manager. Uninstall the cable's COM port. If it has an entry in the USB Controllers section delete that too. (I forget if it does or not.) Close Device Manager. Unplug the cable. Open Add or Remove Programs. Uninstall EcuFlash. Uninstall all OpenPort and/or FTDI driver entries. There should be three OpenPort entries, including one for the OpenPort 2.0. Close Add or Remove Programs. Reboot. If the C:\Program Files\OpenECU directory still exists, delete it. (Or wherever you installed EcuFlash to.) Install the latest version of EcuFlash. (The latest stable release is 1.42.2595 as of this writing.) When the installation dialogs for the OpenPort drivers pop up as part of installing EcuFlash, install them too. Plug in the cable. Wait for Windows to find and install the drivers automatically. Try to read your ECU using EcuFlash. Remember to connect the green debug connectors under the dash. Link to comment Share on other sites More sharing options...
speedracer76 Posted January 10, 2012 Author Share Posted January 10, 2012 Tried that version first from a clean install. I'll try it again tomorrow but I think something is not right with my cable. Link to comment Share on other sites More sharing options...
jayway Posted January 11, 2012 Share Posted January 11, 2012 On my 06 I use my little netbook to datalog but can't flash the ecu because for some reason ecuflash won't connect on it. I use my laptop to flash but I can't datalog because RR doesn't work on that PC. The vag-com cable is just finicky I think, it's a pain but that's how I get mine to work. If you want to roll out to Lincoln we can flash your ecu. Link to comment Share on other sites More sharing options...
speedracer76 Posted January 11, 2012 Author Share Posted January 11, 2012 Jayway thanks for the offer to use your equipment to flash my car. I have tried and retried with the cable I have and two different laptops, at least it works for me to log. I work in North Highlands so I don't mind driving up to Lincoln after work. PM me with what days would work for you. Mike Link to comment Share on other sites More sharing options...
b slaps yo mama Posted January 13, 2012 Share Posted January 13, 2012 I dont have a cable but live on outskirts of highlands by the high school. Link to comment Share on other sites More sharing options...
matt Posted January 15, 2012 Share Posted January 15, 2012 Speedracer76 is it possible you have an Ecutek or Cobb reflash on your ECU right now? Newer versions of those block other software from reading or reflashing. Have you tried your cable+laptop with another 32-bit, pre-CANbus Subaru? Any 2005-2006 Legacy/Outback, 2004-2006 Impreza, 2004-2006 STI, etc. Link to comment Share on other sites More sharing options...
speedracer76 Posted January 15, 2012 Author Share Posted January 15, 2012 I am the first owner of the car so nothing had been done to it. I am getting together with jayway so we will be able to trouble shoot where the problem is and get the car flashed. Link to comment Share on other sites More sharing options...
matt Posted January 15, 2012 Share Posted January 15, 2012 Cool, post what you figure out. Link to comment Share on other sites More sharing options...
speedracer76 Posted January 17, 2012 Author Share Posted January 17, 2012 It was my cable. Used Jayway's cable on my laptop and it flashed my car just fine. Off to ebay I go to order a new $10 cable. Thanks for all your help. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.