NJLegacy2011 Posted August 12, 2014 Share Posted August 12, 2014 Ive been trying to change all the interior lights from the red & orange to blue and dont believe we have cause the lights are built into the switch boards. But this is something I will doing tomorrow on my day off. Now I just have to find the blue led kit, hopefully that wont be to hard to find. Thank you for this thread. Very informative. Link to comment Share on other sites More sharing options...
NJLegacy2011 Posted August 12, 2014 Share Posted August 12, 2014 Ive been trying to change all the interior lights from the red & orange to blue. But this is something I will doing tomorrow on my day off. Now I just have to find the blue led kit, hopefully that wont be to hard to find. Thank you for this thread. Very informative. Link to comment Share on other sites More sharing options...
Picky1 Posted September 30, 2014 Share Posted September 30, 2014 the diffuser just came so ill try to do this over the weekend Where were you able to order just the diffuser from? Also, I searched for the part number (92134ajooa) you noted that appears on the box and haven't been able to find anything? Link to comment Share on other sites More sharing options...
Picky1 Posted September 30, 2014 Share Posted September 30, 2014 I did a little more digging and I think I found the diffuser, see the link below: http://subaruonlineparts.com/repair-parts.php Link to comment Share on other sites More sharing options...
GTEASER Posted September 30, 2014 Share Posted September 30, 2014 ^^That link is to the main page, not the part. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Picky1 Posted September 30, 2014 Share Posted September 30, 2014 ^^That link is to the main page, not the part. Not sure why it is not working, but based on the part number on a few posts above the diffuser is avail...waiting on confirmation from this vendor: CUP HOLDER ASSY SIA http://www.partswebsite.com/images/recycle.png Make: Subaru | Part#: 92134AJ00AList Price: $44.45 Your Price: $33.34 Link to comment Share on other sites More sharing options...
GTEASER Posted September 30, 2014 Share Posted September 30, 2014 http://parts.subaru.com/productSearch.aspx?searchTerm=92134ajooa GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Picky1 Posted September 30, 2014 Share Posted September 30, 2014 Trying to get them to send me an image of this item before I pull the trigger as the description is sort of vague. Link to comment Share on other sites More sharing options...
Hepy117 Posted October 1, 2014 Share Posted October 1, 2014 http://parts.subaru.com/productSearch.aspx?searchTerm=92134ajooa The "o"'s should be zero's. http://parts.subaru.com/productSearch.aspx?&ukey_make=5806&modelYear=&ukey_model=0&ukey_trimLevel=00&ukey_driveline=00&ukey_Category=0&numResults=50&sortOrder=Relevance&isOnSale=0&isAccessory=0&isPerformance=0&searchTerm=92134AJ00A Link to comment Share on other sites More sharing options...
nstg8r Posted October 1, 2014 Share Posted October 1, 2014 The "o"'s should be zero's. http://parts.subaru.com/productSearch.aspx?&ukey_make=5806&modelYear=&ukey_model=0&ukey_trimLevel=00&ukey_driveline=00&ukey_Category=0&numResults=50&sortOrder=Relevance&isOnSale=0&isAccessory=0&isPerformance=0&searchTerm=92134AJ00A Looks like you have to get the entire cup holder with it. This was the cheapest one I could find... http://www.quirkparts.com/subaru/outback/92134aj00a Link to comment Share on other sites More sharing options...
Picky1 Posted October 1, 2014 Share Posted October 1, 2014 ^^^^Yup.... Link to comment Share on other sites More sharing options...
GTEASER Posted October 1, 2014 Share Posted October 1, 2014 That's what I thought, the whole cup holder from a 2010 must be purchased. Best price I found is Heuberger Motors, but only is really worth it if you buy other parts to spread the shipping cost. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
bradze Posted October 1, 2014 Share Posted October 1, 2014 yeah, i didn't realize the whole cup holder assembly came, i switched that part but i still havent put in the LEDs i bought. Link to comment Share on other sites More sharing options...
mysubi01 Posted October 18, 2014 Share Posted October 18, 2014 Here's one more shot. Sorry for the blur, this was a very long, hand held exposure, 0.8 seconds @ f2.8 and ISO 1000. I think that's pretty good shot for almost one whole second of an open shutter. http://farm5.static.flickr.com/4101/5446339729_48c81d7a97_b.jpg Thanks! Oh, BTW, this whole thing cost me about and hour and a half and $5.99 for the LEDs from the local auto store. I will try to put an led strip that I purchased before form ebay, will post results later today. Link to comment Share on other sites More sharing options...
mysubi01 Posted October 18, 2014 Share Posted October 18, 2014 I've looked at the Subaru factory option for the Interior Illumination kit that sells for $175. I don't care for the price nor the blue lights above the feet area. I do like the blue cup holder lights and the front cubbie hole are in front of the shifter. So instead of buying the factory kit, I did my own and put it in the same spots that the factory designed in the cup holder lights. At the bottom of this thread there is a full set of diagrams that shows how to remove the center arm rest/console box. http://legacygt.com/forums/showthread.php/need-help-removing-center-console-armrest-155444.html The first this you need to do is pull the center section of the console by removing the rubber mat in the forward cubbie hole in front of the shifter. http://farm5.static.flickr.com/4114/5446057993_74a0c6ba69_b.jpg Then pull the shifter. http://farm6.static.flickr.com/5055/5446658876_d94a770d93_b.jpg Pull up the center section of the console and disconnect the wires. There are three plugs that need to be released to pull the whole section out and fully release it from the console base. http://farm5.static.flickr.com/4153/5446059229_5a01295865_b.jpg There's all sorts of room under this part for a bunch of stuff. There is also power here too from the 12V power supply in the console box. The cup holder sepperates from the main section by pulling the 4 screws that hold it in place. There is a rubber edge liner that runs around the top of this cup holder. http://farm6.static.flickr.com/5180/5446051133_b31ce6c6a6_b.jpg Peel back one of the edges that covers the factory light mounting area and this is where I inserted my LEDs that I got from the local auto parts store. They sell them in packs of 3 for doing just this sort of thing. http://farm6.static.flickr.com/5015/5446051689_10b70ff849_b.jpg The lights I bought fit perfectly into the factory spot with only a small amount of modification needed to make them fit. Once the cup holder is screwed back in place, these lights won't move. They weren't moving before I screwed the cup hold down either. A nice snug fit. I ran the wires to the back of the cup holder and taped the wires down so they wouldn't come loose or get snagged, then screwed the cup holder back to the main section. http://farm5.static.flickr.com/4141/5446052123_a3ed0be0ab_b.jpg With the wires held toward the back, they are right above the power supply. I simply pulled the plug, inserted the wires into the plug ends (red to the hot center pin of the outlet and black to the outer ground ring and fit the plug back onto the power outlet. The wires were very secure and solidly mounted. I also left the wires fairly long so as to give myself room to manipulate the console cover. http://farm6.static.flickr.com/5298/5446654044_f52b0d4f8d_b.jpg Is there a screw that I need to undo before pulling off the shifter? Link to comment Share on other sites More sharing options...
nstg8r Posted October 18, 2014 Share Posted October 18, 2014 Is there a screw that I need to undo before pulling off the shifter? Go to page 3... 17. Center Console.pdf Link to comment Share on other sites More sharing options...
redlinelegacyGT Posted December 12, 2014 Share Posted December 12, 2014 I just purchased my first Subaru, 2012 Legacy GT, very exciting, the radio and navigation system have no power at all? Blank….. any suggestions how to rout cause the issue? Link to comment Share on other sites More sharing options...
Zee199969 Posted December 12, 2014 Share Posted December 12, 2014 I just purchased my first Subaru, 2012 Legacy GT, very exciting, the radio and navigation system have no power at all? Blank….. any suggestions how to rout cause the issue? is it not under warranty? My "Build" Link to comment Share on other sites More sharing options...
GTEASER Posted December 12, 2014 Share Posted December 12, 2014 Fuse? GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
islandborn Posted December 12, 2014 Share Posted December 12, 2014 power button? Link to comment Share on other sites More sharing options...
redlinelegacyGT Posted December 12, 2014 Share Posted December 12, 2014 I checked the Audio/ Nav. fuse in the inside fuse box, looks ok, any other fuses to power the center radio and Na.v? Link to comment Share on other sites More sharing options...
redlinelegacyGT Posted December 12, 2014 Share Posted December 12, 2014 Which power button? Link to comment Share on other sites More sharing options...
nstg8r Posted December 13, 2014 Share Posted December 13, 2014 (edited) I checked the Audio/ Nav. fuse in the inside fuse box, looks ok, any other fuses to power the center radio and Na.v? It would be fuse #10 in the engine bay fuse box. If it was that fuse, all your interior lighting would be out, too. If all that's working but just not the audio/nav unit, then it's either the unit's built-in fuse (if there is one, I'm not really sure), or the unit is kaput. edit: It could also be fuse #6 in the engine bay. The inside fuse which you said you checked would be #4. Edited December 13, 2014 by nstg8r Link to comment Share on other sites More sharing options...
OZZY2012LEGACY Posted January 10, 2015 Share Posted January 10, 2015 now THIS is how add LED's to your ride..... Link to comment Share on other sites More sharing options...
dfoley4 Posted May 21, 2015 Share Posted May 21, 2015 Has anyone found LEDs that are a good color match to the ones in the inter illumination kit? I'm mixing and matching but unfortunately the LEDs I bought online are a dark blue instead of the light blue/teal-ish color of the OEM ones. Also, I hooked up the LEDs to the dimmed illumination line on the radio but now the dimmer works in the opposite direction of the other lights in the car. Anyone had this problem before? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now