quick4dr Posted January 14, 2012 Share Posted January 14, 2012 any instructions available for removing the leathers seat covers from the front so I can re-upholster them? Link to comment Share on other sites More sharing options...
cseagle08 Posted January 17, 2012 Share Posted January 17, 2012 I would assume that the leather is held on in similar fashion to the cloth (even though the seats are different). I installed leather in my 2.5i a year or so ago. It's just a ton of hog-rings and maybe a half dozen nuts in random locations. I took the seats out of the car (4 bolts and the airbag wire) and brought them in the house where it was warm (because I did this in Maryland in Jan/Feb with snow on the ground). I didn't have instructions but it was pretty easy to figure out. Took a few hours per seat with a set of snap-ring pliers and needle-nose pliers and metric socket set. Link to comment Share on other sites More sharing options...
TheBlubaru Posted January 18, 2012 Share Posted January 18, 2012 I am looking to swap the cover on my passenger seat. which 4 bolts are you talking about? God created turbo lag to give V8s a chance Link to comment Share on other sites More sharing options...
dsickles Posted January 19, 2012 Share Posted January 19, 2012 I am looking to swap the cover on my passenger seat. which 4 bolts are you talking about? pretty sure he is talking about the four bolts that hold the seat down to the floor Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.