Fallschirmjaeger Posted September 6, 2006 Share Posted September 6, 2006 I was thinking about reducing the height of the shift knob on the Blübaru, it's a 5EAT. I did the search but came up empty as to the thead size of the tap/die to use, anyone have that info handy? Since auto and manual have different shaft sizes, (if I remember correctly) we might also get that out of the way at the same time. Thnx guys Link to comment Share on other sites More sharing options...
CasopoliS Posted September 6, 2006 Share Posted September 6, 2006 pretty sure the MT is M12 x 1.25 Link to comment Share on other sites More sharing options...
Fallschirmjaeger Posted September 6, 2006 Author Share Posted September 6, 2006 I'm kinda betting we'll find out the AT is ..mmm... M10 x 1.25, just a hunch Link to comment Share on other sites More sharing options...
Spinjockey Posted September 6, 2006 Share Posted September 6, 2006 Don't think the thread size is going to matter as most of the shifter knobs (at least the momo MT ones) are plastic insert self threading. So the diameter you gotta worry about. Link to comment Share on other sites More sharing options...
Fallschirmjaeger Posted September 6, 2006 Author Share Posted September 6, 2006 Just modded the following... till I get a Real shiftknob The stocker http://i47.photobucket.com/albums/f159/unnamed-source/DSC00115.jpg Lowered, yes it still clears (barely) http://i47.photobucket.com/albums/f159/unnamed-source/DSC00114.jpg Aluminum doodad till something better comes along http://i47.photobucket.com/albums/f159/unnamed-source/DSC00117.jpg Link to comment Share on other sites More sharing options...
automaticsti Posted September 6, 2006 Share Posted September 6, 2006 i think they are the same...that one dude on here from aussie with the black one that was in suby sport had an STI knob on his with a shift boot over everything. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.