GearOnePerformance Posted November 12, 2012 Share Posted November 12, 2012 Does any one see a problem with using 08+ sti calipers up front and the 07 and below rears? Would the balance be off? I know the 08+ doesnt bolt up, thats the reason for the question. Also color wont matter as they will b powder coated. Link to comment Share on other sites More sharing options...
BAC5.2 Posted November 12, 2012 Share Posted November 12, 2012 As long as both fronts match, and both rears match, then you should be good to go. Using 07- rears is pretty common with using 08+ fronts. I would not suggest mixing an 08+ front caliper and an 04-07 front caliper, though. [URL="http://legacygt.com/forums/showthread.php/proper-flip-key-interesti-159894.html"]Flip Key Development Thread[/URL] "Genius may have its limitations, but stupidity is not thus handicapped." - E. Hubbard Link to comment Share on other sites More sharing options...
AZP Installs Posted November 12, 2012 Share Posted November 12, 2012 Does any one see a problem with using 08+ sti calipers up front and the 07 and below rears? Would the balance be off? I know the 08+ doesnt bolt up, thats the reason for the question. Also color wont matter as they will b powder coated. 04-13 STi front calipers are the same, the only difference is that the 08+ are black and the 04-07 are gold. The rears are different in terms of their mountings. -Mike Paisan http://www.pbase.com/paisan/image/91072632.jpg http://www.pbase.com/paisan/image/145749898/original.jpg http://www.pbase.com/paisan/image/133406601.jpg http://www.whiteline.com.au/images/logos/perf1.jpg 11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts. Call directly as We carry almost every manufacturer now, so before you buy parts call us. Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs "Race Tested, Enthusiast Approved!" Link to comment Share on other sites More sharing options...
GearOnePerformance Posted November 12, 2012 Author Share Posted November 12, 2012 Thanks guys! Link to comment Share on other sites More sharing options...
AZP Installs Posted November 12, 2012 Share Posted November 12, 2012 As long as you are powdercoating them, might as well get whichever you can find cheaper. -Mike Paisan http://www.pbase.com/paisan/image/91072632.jpg http://www.pbase.com/paisan/image/145749898/original.jpg http://www.pbase.com/paisan/image/133406601.jpg http://www.whiteline.com.au/images/logos/perf1.jpg 11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts. Call directly as We carry almost every manufacturer now, so before you buy parts call us. Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs "Race Tested, Enthusiast Approved!" Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.