bakabakablah Posted January 10, 2011 Share Posted January 10, 2011 Cross-posted this in the WTB area but putting up a thread here as well. I was a bit clumsy the other day and managed to break the bit of plastic that holds the retaining clip on while changing out my bulbs. If anyone has a set of 07 lights, a driver's side light, or even a set of your old/spare stock Legacy projector bowls, I'd greatly appreciate it if you sold them to me. Even better would be a set of RX330 non-afs bowls as this would probably be an opportune time for me to upgrade my lighting, but I realize these are hard to come by so I'm not holding my breath on these. Link to comment Share on other sites More sharing options...
MiniStiGuy Posted January 13, 2011 Share Posted January 13, 2011 See if Msprank has a spare stock housing. If not him then I know I have a few and could mail you one if you just pay for the shipping. OEM HID's Rx330 Retro Link to comment Share on other sites More sharing options...
bakabakablah Posted January 13, 2011 Author Share Posted January 13, 2011 Stock housing with the projector bowl, right? I'll send him a PM about it. Thanks! Link to comment Share on other sites More sharing options...
MiniStiGuy Posted January 13, 2011 Share Posted January 13, 2011 It's not the headlight housing just the bowl for the projector that has that spring clip on it. Just this section. The projector bowl. http://i170.photobucket.com/albums/u280/garrett804/IMG_0329.jpg OEM HID's Rx330 Retro Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.