frkkevin Posted January 8, 2012 Share Posted January 8, 2012 Pulled the rims off my wife's wagon to see how they looked.. now I'm thinking about ordering some and getting some powdercoat work done http://i535.photobucket.com/albums/ee359/frkkevin/ca7c2d78.jpg 512whp/465ftlb 2005 5EAT Legacy (Build Log) Videos - - Link to comment Share on other sites More sharing options...
01rs25 Posted January 8, 2012 Share Posted January 8, 2012 Not bad at all! Dial in the camber and go a bit lower and it would be perfect! Dig the black wheels on the white too! Slammed more than your girlfriend. Link to comment Share on other sites More sharing options...
frkkevin Posted January 8, 2012 Author Share Posted January 8, 2012 Yea.. car is sitting a little high since I run the enkie rpf1 + 35 with drag radials.. had rubbing issues but rolled the fenders quite a bit so I could go lower even with that same setup.. or this one 512whp/465ftlb 2005 5EAT Legacy (Build Log) Videos - - Link to comment Share on other sites More sharing options...
01rs25 Posted January 8, 2012 Share Posted January 8, 2012 Looks like you'll have the same issues I ran into with rubbing on the front bumper mounting tabs. But other then that it looks spot on! Slammed more than your girlfriend. Link to comment Share on other sites More sharing options...
Ohitsspencer Posted January 8, 2012 Share Posted January 8, 2012 That looks SO good. What's the offset? Are you going to have to pull fenders at all? Link to comment Share on other sites More sharing options...
frkkevin Posted January 8, 2012 Author Share Posted January 8, 2012 That looks SO good. What's the offset? Are you going to have to pull fenders at all? offset is +20 .. I did a solid roll but don't think there will be issues especially if I add a bit of camber 512whp/465ftlb 2005 5EAT Legacy (Build Log) Videos - - Link to comment Share on other sites More sharing options...
Chameleon Posted January 8, 2012 Share Posted January 8, 2012 nasty ... i sir will give you the thumbs up in approval .. lol ! Link to comment Share on other sites More sharing options...
mwm5094 Posted January 8, 2012 Share Posted January 8, 2012 so sick....what wheels are those? Link to comment Share on other sites More sharing options...
mk6933 Posted January 8, 2012 Share Posted January 8, 2012 Looks like XXR 527s Link to comment Share on other sites More sharing options...
frkkevin Posted January 8, 2012 Author Share Posted January 8, 2012 xxr 527 18x9.75 +20 512whp/465ftlb 2005 5EAT Legacy (Build Log) Videos - - Link to comment Share on other sites More sharing options...
BXR4T Posted January 8, 2012 Share Posted January 8, 2012 DANG! More pics?! Link to comment Share on other sites More sharing options...
frkkevin Posted January 8, 2012 Author Share Posted January 8, 2012 When I do run a set daily car will be lower.. needs to be dropped another inch in the rear and half inch in the front IMO for this to look completely right.. maybe even more http://i535.photobucket.com/albums/ee359/frkkevin/leggy5.jpg http://i535.photobucket.com/albums/ee359/frkkevin/09d7cd7b.jpg This is what it looks like with my enkie rpf1 +35 http://i535.photobucket.com/albums/ee359/frkkevin/798a8b73.jpg 512whp/465ftlb 2005 5EAT Legacy (Build Log) Videos - - Link to comment Share on other sites More sharing options...
01rs25 Posted January 8, 2012 Share Posted January 8, 2012 What size tires? Slammed more than your girlfriend. Link to comment Share on other sites More sharing options...
mattg Posted January 8, 2012 Share Posted January 8, 2012 Looks aggro, but quite a bit too stretched and too poked for my liking. Link to comment Share on other sites More sharing options...
01rs25 Posted January 8, 2012 Share Posted January 8, 2012 Just saw the tag! Love it! Slammed more than your girlfriend. Link to comment Share on other sites More sharing options...
frkkevin Posted January 8, 2012 Author Share Posted January 8, 2012 What size tires? on the xxrs .. 225/40r18 and on the enkies 225/45r17 512whp/465ftlb 2005 5EAT Legacy (Build Log) Videos - - Link to comment Share on other sites More sharing options...
frkkevin Posted January 8, 2012 Author Share Posted January 8, 2012 Just saw the tag! Love it! Took me a long time to think of a good plate and finally i came up with something that was not already in use. You'd be surprised what plates are being used 512whp/465ftlb 2005 5EAT Legacy (Build Log) Videos - - Link to comment Share on other sites More sharing options...
808_lgt Posted January 8, 2012 Share Posted January 8, 2012 Too much poke for my liking... Link to comment Share on other sites More sharing options...
TRSCobra Posted January 8, 2012 Share Posted January 8, 2012 I like your RPF1's better. Way too stretched for my tastes. Link to comment Share on other sites More sharing options...
lilziggy1320 Posted January 8, 2012 Share Posted January 8, 2012 I agree i liked the RPF1's better, that FMIC looks nice and snug though Link to comment Share on other sites More sharing options...
Ohitsspencer Posted January 8, 2012 Share Posted January 8, 2012 Maybe I missed it, but how wide are your rpf1's? Link to comment Share on other sites More sharing options...
BAC5.2 Posted January 8, 2012 Share Posted January 8, 2012 Tires are WAY too stretched, and the wheels stick out WAY too much for my tastes. Nothin says lovin like drag radials on a street car. [URL="http://legacygt.com/forums/showthread.php/proper-flip-key-interesti-159894.html"]Flip Key Development Thread[/URL] "Genius may have its limitations, but stupidity is not thus handicapped." - E. Hubbard Link to comment Share on other sites More sharing options...
LosAngelesLGT Posted January 8, 2012 Share Posted January 8, 2012 Im confused, the XXR are supposed to be an improvement from the RPF1? Agree, I do not. RPF1 > XXR setup in this instance x 1000 Hellafunctional > Herrabrush But opinions are like assholes... Link to comment Share on other sites More sharing options...
frkkevin Posted January 8, 2012 Author Share Posted January 8, 2012 Maybe I missed it, but how wide are your rpf1's? 17x8" 512whp/465ftlb 2005 5EAT Legacy (Build Log) Videos - - Link to comment Share on other sites More sharing options...
frkkevin Posted January 8, 2012 Author Share Posted January 8, 2012 Im confused, the XXR are supposed to be an improvement from the RPF1? Agree, I do not. RPF1 > XXR setup in this instance x 1000 Hellafunctional > Herrabrush But opinions are like assholes... rpf1s are hideous looking IMO .. only bought them because I got a crazy deal and they are super light. The XXRs look better but if I order a set I will not be doing the 9.75 wide and instead running the 18x8.75 +35 512whp/465ftlb 2005 5EAT Legacy (Build Log) Videos - - Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.