tenright25 Posted April 28, 2012 Share Posted April 28, 2012 I have a 97 Legacy GT that has had a 2.2 motor put into it. My problem is that when ever I push the gas to the floor it starts stalling out other wise it runs fine. if anyone knows what this could be please let me know. Link to comment Share on other sites More sharing options...
BDII Posted April 28, 2012 Share Posted April 28, 2012 welcome! Could be a myriad of thing, vacuum line, plugs, coil pack etc etc Need forum help? Private Message legGTLT Link to comment Share on other sites More sharing options...
tenright25 Posted April 28, 2012 Author Share Posted April 28, 2012 I recently did the plugs and wires. what would be the best way to check the lines? Link to comment Share on other sites More sharing options...
Lsnaple Posted April 28, 2012 Share Posted April 28, 2012 Mass air flow sensor? Does it stall once it hits a certain rpm? A lot of soot on the rear bumper where the exhaust is? Link to comment Share on other sites More sharing options...
tenright25 Posted April 28, 2012 Author Share Posted April 28, 2012 it starts to stall when the gas pedal is pushed all the way to the floor. It will barley move and then will have a strong smell of gas. Nothing on the bumper Link to comment Share on other sites More sharing options...
nick.cfrancis Posted April 28, 2012 Share Posted April 28, 2012 MAF. Try cleaning it first. Link to comment Share on other sites More sharing options...
I Donated broknindarkagain Posted April 29, 2012 I Donated Share Posted April 29, 2012 Read the Engine FAQ at the top of the forum. Do everything on the MPG FAQ list and then report back. Is your check engine light on -broknindarkagain My Current Project - Click Here COME AND TAKE IT "The only thing necessary for the triumph of evil is for good men to do nothing." Link to comment Share on other sites More sharing options...
Natecar101 Posted April 29, 2012 Share Posted April 29, 2012 Do you have an aftermarket intake? Mines does this with the aftermarket cone intake. I rotated it and cleaned the MAF it stopped doing this. Also the stock intake does not do this at all. Subarus can be particular about airflow Link to comment Share on other sites More sharing options...
tenright25 Posted April 29, 2012 Author Share Posted April 29, 2012 im going to read that now. I have an aftermath cone on the factory set-up. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.