Siper2 Posted September 17, 2008 Share Posted September 17, 2008 Hey all. My wife has an '01 LL Bean wagon and I have a quick question. Several months ago I was replacing her fuel filter, and accidentally cut the fuel injection hose, a bit (the run that goes between the engine and filter, not the filter and toward the firewall). I got some replacement, it's Good Year 5/16." It appeared at the time to maybe be slightly off, insofar as diameter, but fit pretty well. I got the clamps back on and all of that. Yesterday my wife smelled fuel while driving, and today it was worse, on her way to our office. I drove over and checked it out; it was dripping from the engine side of that same hose. I tightened the clamp and it stopped. I have no problem occasionally doing this if necessary, but what size hose is stock? Might just be easier to spend a few bucks and not have to worry about it. Maybe it is indeed a little too big, I don't know. Thanks. Link to comment Share on other sites More sharing options...
Siper2 Posted September 25, 2008 Author Share Posted September 25, 2008 Bump Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.