RedDawg Posted December 15, 2009 Share Posted December 15, 2009 http://www.aww-kittah-aww.com/up/public/115913/2.JPG took a screenshot of the Target Boost before i load this map tonite. Just wanted to see if it looks "normal", i.e, that nothing looks way too high for stage 1. Link to comment Share on other sites More sharing options...
McDowell Performance Tunin Posted December 16, 2009 Share Posted December 16, 2009 Holy crap! 2.124 BAR is about 30 PSI. WAYYYYY to high for stage 1 or 2 or our stock turbo. www.facebook.com/mcdowelltuning [sIGPIC][/sIGPIC] Click Here for Stage1, Stage2 and Stage3 Tuning and eTuning Info Link to comment Share on other sites More sharing options...
McDowell Performance Tunin Posted December 16, 2009 Share Posted December 16, 2009 stage 1 should be about 15 PSI or so. Use Romraider to tune your boost, not ECUFlash 1.034 BAR is 15 PSI www.facebook.com/mcdowelltuning [sIGPIC][/sIGPIC] Click Here for Stage1, Stage2 and Stage3 Tuning and eTuning Info Link to comment Share on other sites More sharing options...
mickeyd2005 Posted December 16, 2009 Share Posted December 16, 2009 The ecu uses MAP (manifold absolute pressure). It doesn't use MRP (manifold relative pressure). Romraider displays the boost table in terms of MRP at sealevel only for convenience. ecuflash displays it in absolute pressure. Link to comment Share on other sites More sharing options...
McDowell Performance Tunin Posted December 16, 2009 Share Posted December 16, 2009 ah, thanks Mickeyd. www.facebook.com/mcdowelltuning [sIGPIC][/sIGPIC] Click Here for Stage1, Stage2 and Stage3 Tuning and eTuning Info Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.