Psilan Posted January 28, 2015 Share Posted January 28, 2015 Hi guys, First post here. Great forum and loads of helpful information! My ride: BPE 6.0R 6MT 2005 http://i.imgur.com/0tAXxLc.jpg http://i.imgur.com/7orU2Zo.jpg I haven't been able to find any info on this; I want to install an information panel. Just in the stock location. But I currently have a JDM NAVI in this location. The NAVI is useless to me, being an English speaker, but it does have fuel consumption and trip information that is very useful. Anybody know if it is easy to just grab a info panel from a wrecker and install? Not sure if I will have the same cabling, or the same data cables to supply the info panel... the NAVI will be removed. Thanks. Link to comment Share on other sites More sharing options...
AkumaMax Posted February 1, 2015 Share Posted February 1, 2015 So basically you want to get rid of the Navi and go with a pocket door and small information bar like US models have? Link to comment Share on other sites More sharing options...
nemo Posted February 1, 2015 Share Posted February 1, 2015 http://www.avojdm.com/product_info.php?cPath=&products_id=107&osCsid=2d230b2a1e3d74131152b25bd354fdc6 If you don't vote Trump, out, you're a bigot who hates america. Link to comment Share on other sites More sharing options...
Psilan Posted February 1, 2015 Author Share Posted February 1, 2015 So basically you want to get rid of the Navi and go with a pocket door and small information bar like US models have? Yes that's correct. It was also a JDM option. Thanks Nemo, yes I have seen that. But I don't have a info panel at all - and don't know if it will even work.. Link to comment Share on other sites More sharing options...
AkumaMax Posted February 5, 2015 Share Posted February 5, 2015 Ok there is someone who was just asking me about this info. Seeing as I don't have my Legacy no more there is only so much I can help with. http://legacygt.com/forums/showthread.php/connector-locations-oem-nav-184310p4.html This thread on the last page someone was asking me about how to do this. He will be doing the conversion that you want to do to his JDM legacy so you guys should be able to get together on this and get it done. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.