Jump to content
LegacyGT.com

NRG hood damper/strut


Recommended Posts

I have had the NRG hood damper kit on my car for the last 5 years and the struts are worn out. I have tried the auto parts stores looking for replacements but the ends are too bulky to work with the NRG mounts.

 

Has anyone replaced theirs? Do I have to buy a whole kit again?

 

TIA

Link to comment
Share on other sites

We sell the redline kits. Real nice products. Let us know if you are interested.

 

-mike

 

http://www.pbase.com/paisan/image/91072632.jpghttp://www.pbase.com/paisan/image/141039922.jpg http://www.pbase.com/paisan/image/133406601.jpg http://upload.pbase.com/image/137566671.jpg

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.

Call directly as We carry almost every manufacturer now, so before you buy parts call us.

AIM: AZP Installs | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber

"Race Tested, Enthusiast Approved!"

Link to comment
Share on other sites

  • 8 months later...

I will check, the 05-07 should work but I will verify.

 

-Mike Paisan

 

http://www.pbase.com/paisan/image/91072632.jpg http://www.pbase.com/paisan/image/145749898/original.jpg http://www.pbase.com/paisan/image/133406601.jpg http://www.whiteline.com.au/images/logos/perf1.jpg

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.

Call directly as We carry almost every manufacturer now, so before you buy parts call us.

Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs

"Race Tested, Enthusiast Approved!"

Link to comment
Share on other sites

05-09 Redlines are the same units. We love em!

 

Just let us know and we either have them in stock or can have them within a week.

 

-Mike Paisan

 

http://www.pbase.com/paisan/image/91072632.jpg http://www.pbase.com/paisan/image/145749898/original.jpg http://www.pbase.com/paisan/image/133406601.jpg http://www.whiteline.com.au/images/logos/perf1.jpg

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.

Call directly as We carry almost every manufacturer now, so before you buy parts call us.

Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs

"Race Tested, Enthusiast Approved!"

Link to comment
Share on other sites

Price would depend on which style (painted or SS). The hood opens very close or exactly the height of the oem opening height. I will have the guys check on some of ours we have installed for custys and get some measurements.

 

-Mike Paisan

 

http://www.pbase.com/paisan/image/91072632.jpg http://www.pbase.com/paisan/image/145749898/original.jpg http://www.pbase.com/paisan/image/133406601.jpg http://www.whiteline.com.au/images/logos/perf1.jpg

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.

Call directly as We carry almost every manufacturer now, so before you buy parts call us.

Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs

"Race Tested, Enthusiast Approved!"

Link to comment
Share on other sites

Here are the details:

 

http://www.redlinetuning.com/products_quicklift.html

 

2 yrs on the non-stainless, 4 yrs on the stainless models.

 

Pricing looks like:

 

Quicklift $70 w/shipping to lower 48

Quicklift Elite (Stainless) $120 w/shipping to lower 48

 

-Mike Paisan

 

http://www.pbase.com/paisan/image/91072632.jpg http://www.pbase.com/paisan/image/145749898/original.jpg http://www.pbase.com/paisan/image/133406601.jpg http://www.whiteline.com.au/images/logos/perf1.jpg

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.

Call directly as We carry almost every manufacturer now, so before you buy parts call us.

Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs

"Race Tested, Enthusiast Approved!"

Link to comment
Share on other sites

Yea it's like 5 or 6 inches and then the struts take over (which is good and bad - see below). They also slow near the top avoiding a jolt. My only complaint is that they require some additional force on the hood to shut completely rather than having a point where you can drop it to latch. With an aluminum hood, care needs to be taken when doing this. Still love them though! My last car had OEM struts and using a prop rod was annoying when working in the engine bay.
Link to comment
Share on other sites

  • 2 weeks later...
Price would depend on which style (painted or SS). The hood opens very close or exactly the height of the oem opening height. I will have the guys check on some of ours we have installed for custys and get some measurements.

 

-Mike Paisan

 

http://www.pbase.com/paisan/image/91072632.jpg http://www.pbase.com/paisan/image/145749898/original.jpg http://www.pbase.com/paisan/image/133406601.jpg http://www.whiteline.com.au/images/logos/perf1.jpg

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.

Call directly as We carry almost every manufacturer now, so before you buy parts call us.

Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs

"Race Tested, Enthusiast Approved!"

 

Hi,

 

Any updates for the opening height for my BP5? I used to have a set for my Honda CL7R and it wasn't high enough for me to carry out maintenance works.

Link to comment
Share on other sites

Hi,

 

Any updates for the opening height for my BP5? I used to have a set for my Honda CL7R and it wasn't high enough for me to carry out maintenance works.

 

We haven't checked em out, very close to stock if I remember, unfortunately we don't ship to Singapore :(

 

-Mike Paisan

 

http://www.pbase.com/paisan/image/91072632.jpg http://www.pbase.com/paisan/image/145749898/original.jpg http://www.pbase.com/paisan/image/133406601.jpg http://www.whiteline.com.au/images/logos/perf1.jpg

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.

Call directly as We carry almost every manufacturer now, so before you buy parts call us.

Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs

"Race Tested, Enthusiast Approved!"

Link to comment
Share on other sites

We haven't checked em out, very close to stock if I remember, unfortunately we don't ship to Singapore :(

 

-Mike Paisan

 

http://www.pbase.com/paisan/image/91072632.jpg http://www.pbase.com/paisan/image/145749898/original.jpg http://www.pbase.com/paisan/image/133406601.jpg http://www.whiteline.com.au/images/logos/perf1.jpg

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.

Call directly as We carry almost every manufacturer now, so before you buy parts call us.

Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs

"Race Tested, Enthusiast Approved!"

 

Can you kindly confirm? I can pay you thru paypal and I have a US add which you can ship to if everthing is confirmed.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

Terms of Use