Jump to content
LegacyGT.com

Plug n Play Aux-in mod for 2005 6cd radios


jazzymt

Recommended Posts

  • 2 weeks later...
  • Replies 2.4k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Are these still available?

 

Interested in the Install Kit or Pro Kit.

 

These kits are still available. I ordered mine last Wednesday and got it on Saturday. Did the install yesterday in a little under two hours and it is great! No more dealing with sun spots interfering my FM transmitter or another person on the same freq!

 

I highly recommend this install, super easy and gives a noticeable difference in sound quality. Instructions I would rate a 8/10 and as far as customer service goes I got my package from Jazzy in two days! I would recommend getting your cables from a place like Monoprice.com though, he charges $8 for a cable that you can get for much cheaper elsewhere, just looking out for the financially minded! Thanks for this necessary mod Jazzy! :whore:

Link to comment
Share on other sites

tdelker - The cables I've sold since around 2008 have all been the new 5V standard. I don't know if the adapter converts, but newer cable owners and future customers don't have to worry about that.

 

 

My circa 2007 cable does not work with iphone 5. I wonder if it is because it predates the iphone. This pinout suggest that for iphone pin 11 has to be connect to ground for the iphone to output to the analog lines. When mine is hooked up it just plays from the iphone speaker.

 

http://pinouts.ru/PortableDevices/ipod_pinout.shtml

 

But I would really like to see someone confirm the iphone 5 with lightning to 30 pin works with the PAC cable Jazzy sells. I will PM jazzy to see if he'll take it back if it doesn't and I will post my results if it does work.

 

Tom

Link to comment
Share on other sites

  • 4 weeks later...
  • 2 weeks later...

I will be ordering this tomorrow! I just showed this to my audio guy and he says he will install it for free :D

 

EDIT - Just ordered tonight hopefully I'll have it by next week.

Edited by Adamcor
Link to comment
Share on other sites

  • 3 weeks later...

FYI - I finally have a lightning cable to offer - they are on order today - should have them in a couple days. They are a fair bit more expensive than the last cables - seems to be the trend in Apple products - nothing I can do about that, but it's here at least.

 

Here's the cable:

http://www.jazzyengineering.com/product_info.php?products_id=53

 

Here's the kit:

http://www.jazzyengineering.com/product_info.php?products_id=54

[CENTER][URL="http://legacygt.com/forums/showthread.php?t=18504"]Subaru Plug & Play Aux-in Mod[/URL][/CENTER] [CENTER][URL="http://www.jazzyengineering.com"]www.jazzyengineering.com[/URL][/CENTER]
Link to comment
Share on other sites

Hi I installed the pro kit about 2 years ago with no issues, until recently It stopped working out of the blue, however the aux in can be heard through the fm/am settings on the radio. is this a common issue? i assume its just a loose cable but just wanted to see if its a common failure before I take the dash apart. Thanks.
Link to comment
Share on other sites

hey guys so i bought the kit a year ago and it worked with my old HTC thunderbolt but i upgraded to the galaxy s3 in march and it hasnt worked since, I assumed that it was just the cable since it didnt work with any of my friends' s3 either. this past weekend i finally stopped being lazy and swapped the cable with a known good cable since it has worked with my phone on my stereo in the shop. After replacing the cable it still does not work. A buddy of mine told me to plug the cable in and try restarting the phone with it plugged in, did not work. I can get it to work only if the charger is plugged in. If the charger is unplugged it stops working and plays out of the phone speakers aftter the song is over. I dont have the kit with the ground loop interrupt. Starting yesterday I would get an interference noise coming out of the speakers while the charger was plugged in. once unplugged it would stop until it stopped working. would the ground loop interrupt fix my problem?
Link to comment
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...

Important Information

Terms of Use