wrxwhit Posted August 2, 2014 Share Posted August 2, 2014 Thinking about pulling the trigger soon??? 19x8 +35 or +45 on 245/40/19 on my RRP, not sure if I'd need a pull on +35. Any thoughts? I'm on coilovers also about 1 finger gap front and rear http://img.tapatalk.com/d/14/08/02/5yhehe4u.jpg Link to comment Share on other sites More sharing options...
GTEASER Posted August 2, 2014 Share Posted August 2, 2014 You'll be fine with a little camber both front and rear. Like 1.2 degrees. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
wrxwhit Posted August 2, 2014 Share Posted August 2, 2014 Glad I got my rear adjustable control arms just in case! Link to comment Share on other sites More sharing options...
ncfree Posted August 3, 2014 Share Posted August 3, 2014 Thinking about pulling the trigger soon??? 19x8 +35 or +45 on 245/40/19 on my RRP, not sure if I'd need a pull on +35. Any thoughts? I'm on coilovers also about 1 finger gap front and rear http://img.tapatalk.com/d/14/08/02/5yhehe4u.jpg Check out my build thread. Same wheels in 18x8 +45 on hnrs with 245/40/18s http://legacygt.com/forums/showthread.php?t=221925 Link to comment Share on other sites More sharing options...
wrxwhit Posted August 3, 2014 Share Posted August 3, 2014 Nice build thread Nc! Now you got me thinking if I really need 19's. The spokes on them extend right to the lip of the wheel giving it a larger appearance. Look at my 18's as they look smaller especially in the rear because of 5 gen big ass syndrome. As you can see, the wheel spokes don't extend to the lip making them look smaller. I'm sick of looking at them and everyone asking me if they are 17's!!! http://img.tapatalk.com/d/14/08/03/9y7yvagy.jpg Link to comment Share on other sites More sharing options...
ncfree Posted August 3, 2014 Share Posted August 3, 2014 Thanks. For sure. That's a big thing with wheels if you want them to look big. My 18s look like 19s. The 19s will look like 20s! Link to comment Share on other sites More sharing options...
wrxwhit Posted August 3, 2014 Share Posted August 3, 2014 I didn't see a good side shot pic of your whole car with these wheels. You mind sharing one with an offset picture looking down the side of the car? I'm trying to decide on +35 or +45. Thanks! Link to comment Share on other sites More sharing options...
ncfree Posted August 3, 2014 Share Posted August 3, 2014 I would. But I don't exactly have it right now. Haha im out of town but I will. You could fit the +35 If you ask me. I would go with those and if you have to do a tiny roll do it. Link to comment Share on other sites More sharing options...
ncfree Posted August 3, 2014 Share Posted August 3, 2014 http://img.tapatalk.com/d/14/08/03/yzy7ynap.jpg Link to comment Share on other sites More sharing options...
ncfree Posted August 3, 2014 Share Posted August 3, 2014 http://img.tapatalk.com/d/14/08/03/u5yne6an.jpg here's this one. Link to comment Share on other sites More sharing options...
redbucket Posted August 4, 2014 Share Posted August 4, 2014 (edited) 19 x 8.5, offset +35. Tyres are 225/40 R19 Hankook Ventus Evo2 Suspension is factory shocks with STI pink springs (around 1/2" lower than stock). No scrub or fouling anywhere. Edited August 4, 2014 by redbucket Link to comment Share on other sites More sharing options...
wrxwhit Posted August 4, 2014 Share Posted August 4, 2014 http://img.tapatalk.com/d/14/08/03/yzy7ynap.jpg Nice, thank you! I believe those are matte gunmetal correct? http://img.tapatalk.com/d/14/08/04/y4a5aneq.jpg I think you have changed my mind on color choice. So +35 in either 18 or 19 in gunmetal it'll be. Link to comment Share on other sites More sharing options...
MBspecB Posted August 4, 2014 Share Posted August 4, 2014 Enkei RS05RR 18x9.5 +38 Federal 595RSR 255/35ZR18 http://i282.photobucket.com/albums/kk254/mnabryant/2007%20Legacy%20GT%20specB/6B5D8A13-C022-45BC-B4C8-FB1C9FDCA2BB_zpsxphw1y94.jpg http://i282.photobucket.com/albums/kk254/mnabryant/2007%20Legacy%20GT%20specB/2F076A9F-A9B7-4FBD-B8C8-8306A89FF50C_zpstzutvfdp.jpg Later this week these Gram Lights will be installed: 57Xtreme in winning blue. 18x9.5 +40 http://i282.photobucket.com/albums/kk254/mnabryant/2007%20Legacy%20GT%20specB/FFF51301-C6A8-4D06-9C44-2C8293D2BCEC_zps3zb3sjwb.jpg http://i282.photobucket.com/albums/kk254/mnabryant/2007%20Legacy%20GT%20specB/B1EFEBCE-F3D8-42F0-AB89-19631D3F9BBB_zpscrcnenmv.jpg Link to comment Share on other sites More sharing options...
MBspecB Posted August 4, 2014 Share Posted August 4, 2014 I did't realize I hijacked a thread for the wrong years HAHAAHAH!!! Enjoy. Link to comment Share on other sites More sharing options...
GTEASER Posted August 4, 2014 Share Posted August 4, 2014 Nice wheels!! And clean car! Not a problem. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
ncfree Posted August 4, 2014 Share Posted August 4, 2014 Nice, thank you! I believe those are matte gunmetal correct? http://img.tapatalk.com/d/14/08/04/y4a5aneq.jpg I think you have changed my mind on color choice. So +35 in either 18 or 19 in gunmetal it'll be. Yes. They are gunmetals. Haha they're nice. The only reason I'd say go bronze is because not as many have them so it would look more original. But I can't argue with the love I have for gunmetal so if you like them more do it. Either 19 or 18 looks good. And if you do 19s and 35 offset ima be super jealous. Question is.. Little more performance or a little more from the looks department... Link to comment Share on other sites More sharing options...
Brent C Posted August 4, 2014 Share Posted August 4, 2014 wheels and other stuff for sale...... http://legacygt.com/forums/showthread.php/going-back-stock-19x9-5-avant-garde-wheels-tein-coilovers-228785.html Link to comment Share on other sites More sharing options...
wrxwhit Posted August 5, 2014 Share Posted August 5, 2014 Yes. They are gunmetals. Haha they're nice. The only reason I'd say go bronze is because not as many have them so it would look more original. But I can't argue with the love I have for gunmetal so if you like them more do it. Either 19 or 18 looks good. And if you do 19s and 35 offset ima be super jealous. Question is.. Little more performance or a little more from the looks department... I'm am just digging the gunmetal! If only the bronze were more of a deeper bronze like a sports bronze I'd prob go that route. These don't seem to pop, kind of a pale/silvery bronze if that's makes sense . Im sticking with 18's for practicality and performance +35 once petty cash fund is good and ready... Link to comment Share on other sites More sharing options...
ncfree Posted August 5, 2014 Share Posted August 5, 2014 I'm am just digging the gunmetal! If only the bronze were more of a deeper bronze like a sports bronze I'd prob go that route. These don't seem to pop, kind of a pale/silvery bronze if that's makes sense . Im sticking with 18's for practicality and performance +35 once petty cash fund is good and ready... You won't be disappointed. Besides Saving 100 bones a tire. Haha. Like I said. You may need a tiny tiny roll at +35 to be aware. Post some pics once this gets done. I'd like to see it. Link to comment Share on other sites More sharing options...
wrxwhit Posted August 5, 2014 Share Posted August 5, 2014 For damn sake, just came across these Niche Targa's +40. Decisions??? http://img.tapatalk.com/d/14/08/05/yqeqymus.jpg Link to comment Share on other sites More sharing options...
Clean13 Posted August 5, 2014 Share Posted August 5, 2014 I would get those niche's over the tsw's. Everyone has the tsw nurbs.. be different. Besides those are wayyyyy nicer haha Link to comment Share on other sites More sharing options...
RailKill Posted August 5, 2014 Share Posted August 5, 2014 I like those Niche's. I was very close to pulling the trigger on them but then I came across my Enkei's Link to comment Share on other sites More sharing options...
fredrik94087 Posted August 5, 2014 Share Posted August 5, 2014 For damn sake, just came across these Niche Targa's +40. Decisions??? http://img.tapatalk.com/d/14/08/05/yqeqymus.jpg They look great and they will work well as an anchor as well...check out the weight on these beauties... http://www.nicheroadwheels.com/specs.cfm?id=2396 "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
GTEASER Posted August 5, 2014 Share Posted August 5, 2014 (edited) Too many little crevaces on the Niche's for me. Konig Oversteer in Opal finish. These can be had in 18x8+45 or 18x9+42. And also 19x8.5+45. These sizes range in weight from about 22 pounds to about 26 for the 19's. For reference, out stock GT wheels weigh 26lbs. http://www.konigwheels.com/Konig-Home/Konig-Passenger-Wheels/OVERSTEER_OPAL Edited August 5, 2014 by GTEASER GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
fredrik94087 Posted August 5, 2014 Share Posted August 5, 2014 Too many little crevaces on the Niche's for me. Konig Oversteer in Opal finish. These can be had in 18x8+45 or 18x9+42. And also 19x8.5+45. These sizes range in weight from about 22 pounds to about 26 for the 19's. For reference, out stock GT wheels weigh 26lbs. [ATTACH]189208[/ATTACH] http://www.konigwheels.com/Konig-Home/Konig-Passenger-Wheels/OVERSTEER_OPAL These are better: The weight is stated before the hub bore which are all 73mm 227001166 37O-OS67510459 16x7.5 5x100 +45 6.02 CAPOVERSTEER 1525 17.9 73.00mm 227001156 37O-OS67512459 16x7.5 5x112 +45 6.02 CAPOVERSTEER 1525 17.9 73.00mm 227001157 37O-OS67514409 16x7.5 5x4.50 +45 6.02 CAPOVERSTEER 1525 17.9 73.00mm 227001158 37O-OS78510459 17x8 5x100 +45 6.27 CAPOVERSTEER 1525 19 73.00mm 227001159 37O-OS78508459 17x8 5x108 +45 6.27 CAPOVERSTEER 1525 19 73.00mm 227001160 37O-OS78512459 17x8 5x112 +45 6.27 CAPOVERSTEER 1525 19 73.00mm 227001161 37O-OS78514359 17x8 5x4.50 +35 5.88 CAPOVERSTEER 1525 19 73.00mm 227001162 37O-OS78514459 17x8 5x4.50 +45 6.27 CAPOVERSTEER 1525 19 73.00mm 227001163 37O-OS88510459 18x8 5x100 +45 6.27 CAPOVERSTEER 1525 19.6 73.00mm 227001164 37O-OS88512459 18x8 5x112 +45 6.27 CAPOVERSTEER 1525 19.6 73.00mm 227001165 37O-OS88514359 18x8 5x4.50 +35 5.88 CAPOVERSTEER 1525 19.6 73.00mm 227001081 37O-OS88514459 18x8 5x4.50 +45 6.27 CAPOVERSTEER 1525 19.6 73.00mm 227001070 37O-OS89510429 18x9 5x100 +42 6.65 CAPOVERSTEER 1525 20 73.00mm 227001071 37O-OS89514359 18x9 5x4.50 +35 6.38 CAPOVERSTEER 1525 20 73.00mm 227001072 37O-OS89514229 18x9 5x4.50 +22 5.87 CAPOVERSTEER 1525 20 73.00mm 227001073 37O-OS98510459 19x8.5 5x100 +45 6.52 CAPOVERSTEER 1525 21.2 73.00mm 227001074 37O-OS98514309 19x8.5 5x4.50 +30 5.93 CAPOVERSTEER 1525 21.2 73.00mm 227001075 37O-OS98514459 19x8.5 5x4.50 +45 6.52 CAPOVERSTEER 1525 21.2 73.00mm 227001076 37O-OS99514259 19x9.5 5x4.50 +25 6.23 CAPOVERSTEER 1525 22 73.00mm http://www.atd-us.com/files/wheeldatabook2014.pdf "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now