bama16 Posted February 20, 2008 Share Posted February 20, 2008 i'm need to get some parts powdercoated on my z....i had a guy in knew in durango do all my stuff before...and his prices were great...but haven't looked to hard since i got up to denver. anyone have someone good they use that doesn't charge an arm and a leg? Link to comment Share on other sites More sharing options...
KA81 Posted February 20, 2008 Share Posted February 20, 2008 try PMing bskey he power coated his wheels before. might be able to refer you to someone. Link to comment Share on other sites More sharing options...
chenc544 Posted February 20, 2008 Share Posted February 20, 2008 Do you know Tim (aka Woody75 on tt.net)? He does his own power coating. I think he can handle small pieces but not something like a wheel. Link to comment Share on other sites More sharing options...
tommypenguin Posted February 20, 2008 Share Posted February 20, 2008 I got my 06 wrx wheels powder coated at a place off of santa fe and oxford, I'll find the number for you. The guy did a great job and was reasonably priced compared to everyone else I called. Link to comment Share on other sites More sharing options...
praedet Posted February 20, 2008 Share Posted February 20, 2008 try PMing bskey he power coated his wheels before. might be able to refer you to someone.Brett's came out pretty bad... I doubt he would recommend the guy Link to comment Share on other sites More sharing options...
bama16 Posted February 21, 2008 Author Share Posted February 21, 2008 that'd be great.....i called a couple places today...they didn't blast the parts...i had to...and then it was still $150 for some little parts...crazy...in durango i got all 4 wheels, a sway bar, control arms and crossmember which he had to bake to get al the dirt and grease out...for $230. Link to comment Share on other sites More sharing options...
tommypenguin Posted February 21, 2008 Share Posted February 21, 2008 Wow that is a steal of a deal ^^^ My guy charged if IIRC 300ish for all 4 of my 17 inch wheels and extra clear coat. His number is 720-488-5499, the company is called pristine powder coat, good luck. Link to comment Share on other sites More sharing options...
bama16 Posted February 21, 2008 Author Share Posted February 21, 2008 dang! maybe i'll just wait til i make a trip down to durango. i'm driving to this place over off 58th and i25 in the morning with my parts....cause it's too hard to describe on the phone...see what it'll run. bummer is the car is torn apart...there's no rear end at all in it...and we are buying a new house so i have to get it mobile...and i wanna get it done before i move end of next month...so i don't have to put it back together and then take it apart again. at that rate i'll pick up a blasting cabinet from harbor freight...and a junk over from CL....and start doin my own. Link to comment Share on other sites More sharing options...
enthusiast Posted February 21, 2008 Share Posted February 21, 2008 From coloradoracing.net (thread here) Posting list for the lazy. *** NOT IN ANY ORDER *** Colorado Powder Coating Inc (and sandblasting) 3801 E 68th Ave Commerce City, CO 80022-2240 (303) 853-0394 K&K Painting 245 Bunyan Avenue Berthoud, CO 80513 Phone: (970) 532-3885 Sentry Powder Coating 2812 N 9th St Canon City, CO 81212-8518 Phone: (719) 275-8691 Fax: (719) 269-3397 Powder Coating Specialties, Inc. 550 Orchard Street Golden, CO 80401 Phone : (303) 278-0406 Fax: (303) 279-6852 jack.howell@powdercoatingspecialties.com Web Site: www.powdercoatingspecialties.com Niland Company 320 N. Clark Dr. El Paso, TX 79905 Toll free: (800) 648-9013 Fax: (888) 779-3065 Email - info@nilandco.com Web Site - www.nilandco.com Premium Powder Coating 10765 Turner Blvd., Unit H Longmont, CO 80504 Phone: (303) 776-7560 Fax: (303) 776-0644 Email: shane@premiumpowdercoating.com Website: www.premiumpowdercoating.com Spectrum Powder Works, LLC 309 Arrawanna St Suite D Colorado Springs, CO 80909 Phone: (719)633-5560 Fax: (719)633-5290 Taint Paint 3368 Adobe Court Colorado Springs, CO 80907 Phone: (719) 447-9552 Fax: (719) 447-9547 Lincoln Plating Company 777 Umatilla Street Denver, Colorado 80204 Phone: (303) 534-8161 Fax: (303) 534-3815 Mile High Powder Coating 4275 South Navajo Street Englewood, CO 80110 Phone: (303) 789-1485 Fax: (303) 783-8998 Pristine Powder Coating <-- bama16, and tommypenguin have used them. 3768 South Lipan Street Englewood, CO 80111 Phone: (720) 488-5499 Fax: (720) 488-5499 Irrigation Systems Co 2098 Hwy 6 & 50 Fruita, CO 81521 Phone: (970) 242-2900 Toll Free: (800) 759-0336 Fax: (970) 242-8205 Monument Powder Coating 169 S. Mulberry Street Fruita, CO 81521 Phone: (970) 858-2070 Fax: (970) 858-0573 Foothills Powder Coating, Inc 15975 W 5th Ave Golden, CO 80401-5517 Phone: (303) 278-4423 Pro Powder Coating 549 Bogart Lane Grand Junction, CO 81505 Phone: (970) 241-3422 Fax: (970) 257-9419 Dellenbach & Co. llc (New) 702 5th Street Greeley, CO 80631 Phone: (970) 392-9460 Alpine Powder Coating 2295 Logos Ct Junction, CO 81505-9731 Phone: (970) 245-0893 Rocky Mountain Powder Coating 205 3rd Ave. Longmont, CO 80501 Phone: (303) 772-2701 Fax: (303) 772-5710 MyPowderCoater 275 Shoop Drive Penrose, CO 81240 Phone: (719) 784-9262 Fax: (719) 372-9109 Pueblo Powder Coater 2126-C Prairie Pueblo, CO 81005 Phone: (719) 561-9946 Fax: (719) 566-3928 Applied Plastic Coatings, Inc. 11771 W. 49th Ave. Wheat Ridge, CO 80033 Phone: (303) 424-9200 Toll Free: (800) 743-8964 Fax: (303) 424-8800 My mod list Link to comment Share on other sites More sharing options...
icy Posted February 26, 2008 Share Posted February 26, 2008 Pristine Powder Coating 3768 South Lipan Street Englewood, CO 80111 Phone: (720) 488-5499 Fax: (720) 488-5499 I know a guy who knows a guy there. I have seen good work come from them. Lee is good for smaller orders. For those who are looking for their company or mass production Industrialex in Arvada just delivered some parts for us that were absolutely gorgeous. They just set up a new line up there and turned around 500 parts in 3 days including pickup and delivery. HIGHLY RECOMMENDED. Link to comment Share on other sites More sharing options...
bama16 Posted February 27, 2008 Author Share Posted February 27, 2008 yea...pristine is just a few mins down sante fe from my work....i've met and spoke to Lee a few times now and my parts are actually at his shop...hope to pick them up monday when i get back from grandlake. he seems like a really great guy and will post pics of the items when they get back..if the turn out good he will be seeing pretty much all the rest of my car : ) Link to comment Share on other sites More sharing options...
rkl303 Posted March 2, 2008 Share Posted March 2, 2008 How much does powder coating wheels on average cost? I was thinking of doing LGT wheels in a dark bronze. Link to comment Share on other sites More sharing options...
tommypenguin Posted March 2, 2008 Share Posted March 2, 2008 My guy charged if IIRC 300ish for all 4 of my 17 inch wheels and extra clear coat. His number is 720-488-5499, the company is called pristine powder coat, good luck. Link to comment Share on other sites More sharing options...
bama16 Posted March 2, 2008 Author Share Posted March 2, 2008 yeah..i asked about wheels...and his price is 45 per wheel which is normal...he said that if there is factory coating on the wheel then he takes it to a shop close by and they get it off cause it's pretty tough...and that's an additional $15 a wheel...so a total of 240 to coat a set of wheels. Link to comment Share on other sites More sharing options...
rkl303 Posted March 7, 2008 Share Posted March 7, 2008 yea...pristine is just a few mins down sante fe from my work....i've met and spoke to Lee a few times now and my parts are actually at his shop...hope to pick them up monday when i get back from grandlake. he seems like a really great guy and will post pics of the items when they get back..if the turn out good he will be seeing pretty much all the rest of my car : ) Any Pics? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.