GoofyLGT Posted January 4, 2010 Share Posted January 4, 2010 How would I go about doing this? Do I just buy sti hubs? is it hard? Whats all involved? The reason I ask is that I have a really nice set of rims that are the wrong lug pattern. They already have brand new tires on them also. Link to comment Share on other sites More sharing options...
chutrain Posted January 5, 2010 Share Posted January 5, 2010 I've also questioned this. There are so many more options with 5x114.3. Link to comment Share on other sites More sharing options...
tailgatewagon Posted January 5, 2010 Share Posted January 5, 2010 strangly enough svx and sti use the same rear wheel bearings. legys and svx don't which leads me to belive the hub is wider to use the bigger bearings and i would supose(but dont know) that the axle is also differnt... Link to comment Share on other sites More sharing options...
Guest Posted January 5, 2010 Share Posted January 5, 2010 I posted about this few times. Front - 08+ STI hubs should bolt on, but ABS might work or not. No one tried. Rear - no bolt on option. Would require custom hub. A good machine shop probably could make one. Especially using 00-04 bearing/hub as a core, since they are available separately, unlike 05-09, where hearing/hub come as an assembly only. JDM S402 DOES NOT have 5x114.5 despite some people claiming it does. It's 5x100 as well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.