dirtyvw Posted December 30, 2013 Share Posted December 30, 2013 hey there I have a 96 brigton wagon. I recently picked up a 98 outback hood with scooop. bumper cover beam and grille. I installed the hood with zero issues. Went to install the bumper cover an ran into some issues. I couldn't get the bumper to line up correctly with the core support. Do I need ob headlights? Or trim the bumper cover or? Any help would be great I did alot of google seaching but couldn't really find anything helpful besides finished product photos. Link to comment Share on other sites More sharing options...
Zues Marine Posted December 30, 2013 Share Posted December 30, 2013 second gen bumper swaps are a direct bolt-in and go as long as you are swapping both the beam and cover.. you will want the grille too, as the GT/OB models are a bit taller than L/Brightons Link to comment Share on other sites More sharing options...
dirtyvw Posted December 30, 2013 Author Share Posted December 30, 2013 do you know if the rear bumper needs the beam to fit aswell? Link to comment Share on other sites More sharing options...
Kennyfvholla Posted December 30, 2013 Share Posted December 30, 2013 I've answered these two questions at least five times in other threads. Link to comment Share on other sites More sharing options...
dirtyvw Posted December 30, 2013 Author Share Posted December 30, 2013 you should make it six. Link to comment Share on other sites More sharing options...
Zues Marine Posted December 30, 2013 Share Posted December 30, 2013 you should make it six. Hahaaa.. Yeah snag the beam in the back too Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.