AriA Posted June 25, 2016 Share Posted June 25, 2016 My girlfriend was driving home the other day took a turn missed a gear and then had trouble getting the car in gear. It has a short shifter so I assumed she wasn't used to dealing with that. The next day I noticed the shifter was low, about an inch lower than normal. But it was also off center first and second where almost impossible to reach the shifter would bump into the side wall, and going in reverse looks like neutral. Anyone had this issue before? Link to comment Share on other sites More sharing options...
RustyRuu Posted June 25, 2016 Share Posted June 25, 2016 http://opposedforces.com/parts/legacy/us_b12/type_3/manipulation/manual_gear_shift_system/ here are my thoughts, part 18 fell out of 21. or the nut from 19 had walked out and that is off. i have no idea just some things to check Link to comment Share on other sites More sharing options...
AriA Posted June 26, 2016 Author Share Posted June 26, 2016 Thanks for the insight. That shouldn't be to terribly hard to check out Link to comment Share on other sites More sharing options...
SBT Posted June 26, 2016 Share Posted June 26, 2016 My assessment as well. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.