Kevlar_07 Posted September 4, 2014 Share Posted September 4, 2014 I have a 30in LED light bar I want to put on my 96 Outback, has anyone done this? Im looking for ideas and pics, other than just making brackets and drilling in to the bumper beam. Im wanting to keep in out front and about head light height. Link to comment Share on other sites More sharing options...
98legwag Posted September 5, 2014 Share Posted September 5, 2014 You can make mounts that come out through the grill and attach to the bumper behind everything. I am not sure how wide the grill is though compared to the LED bar. Link to comment Share on other sites More sharing options...
mailman Posted September 5, 2014 Share Posted September 5, 2014 http://www.writerguy.com/primitive/lighting.htm Link to comment Share on other sites More sharing options...
Kevlar_07 Posted September 8, 2014 Author Share Posted September 8, 2014 You can make mounts that come out through the grill and attach to the bumper behind everything. I am not sure how wide the grill is though compared to the LED bar. I've decided to make a bracket that attaches to the bumper beam then comes out through the grill that will attach to an extender bracket on each side to reach the mounting holes of the bar if that makes sense. I'll try to remember to take pics as it is being made. I have some 5/16 steel plate laying around so that's what it will be made of. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.