GK205 Posted April 9, 2016 Share Posted April 9, 2016 I have a subaru legacy 2009 gt, I'm intend to swap the original low beam to leds. I did some research through google and locked on a conversion kit broview s7 50w. My question is can I change the bulbs myself? do I need to buy extra accessory? what's tool I need? sorry for my stupid qustion. Link to comment Share on other sites More sharing options...
Phillip J. Fry Posted April 9, 2016 Share Posted April 9, 2016 lumens are probably lower than hid. can do yourself. not need anything. flat tip, phillips # 2 and your fingers Link to comment Share on other sites More sharing options...
WahooNo2 Posted April 9, 2016 Share Posted April 9, 2016 it looks like a neat kit. For the kit i used on mine i had issues with fitting all the stuff inside the light housing so i could close the rear cap. Another issue was that it was hard to close the clip to secure the base to the housing, i had to take the heat sink off to get it in, close the clip, then put the heat sink back on. i took my kit out after the test fit and trial on my car because i need to modify the heat sink braid on it so i can close the rear cap i would also make sure you get something with an easy return policy so you can send back if you dont like them or have fitment issues. good luck and let us know how it goes Link to comment Share on other sites More sharing options...
zangado1 Posted April 9, 2016 Share Posted April 9, 2016 http://store.candlepower.com/osraulhiouh7.html Link to comment Share on other sites More sharing options...
coldsoda Posted April 9, 2016 Share Posted April 9, 2016 http://store.candlepower.com/osraulhiouh7.html ^ That's what I bought. Link to comment Share on other sites More sharing options...
zangado1 Posted April 9, 2016 Share Posted April 9, 2016 ^ That's what I bought. I bought their H-3 yellow bulbs as well. Happy with the H-7's I got there too. A first class operation the people who work there calling in my order. Now im going to get some LED's for the interior and exterior lighting. Link to comment Share on other sites More sharing options...
GK205 Posted April 11, 2016 Author Share Posted April 11, 2016 it looks like a neat kit. For the kit i used on mine i had issues with fitting all the stuff inside the light housing so i could close the rear cap. Another issue was that it was hard to close the clip to secure the base to the housing, i had to take the heat sink off to get it in, close the clip, then put the heat sink back on. i took my kit out after the test fit and trial on my car because i need to modify the heat sink braid on it so i can close the rear cap i would also make sure you get something with an easy return policy so you can send back if you dont like them or have fitment issues. good luck and let us know how it goes I just bought the V8 leds, i will let you know the result after I installed them. Link to comment Share on other sites More sharing options...
Phillip J. Fry Posted April 11, 2016 Share Posted April 11, 2016 ^ That's what I bought. those are 2100 lumen. hid is 3100 lumen Link to comment Share on other sites More sharing options...
Jongrom Posted April 12, 2016 Share Posted April 12, 2016 Amazon has some awesome interior LED. Cutequeen is the brand. Swapped puddle lights, dome and rear cargo for cheap... I wanted to support the led guy here on the forum, but they never replied to my email, not to mention the kits are way too expensive. super bright and no issues so far... except make sure you don't install backwards cuz u might burn your car down! haha Link to comment Share on other sites More sharing options...
GK205 Posted April 22, 2016 Author Share Posted April 22, 2016 Hello Guys, this is what's I got, the light work amazing, just shoot some pics http://i1376.photobucket.com/albums/ah17/Sharephotos2658/broview-v8-photo-1_zpsg7n4bhk0.jpg~original http://i1376.photobucket.com/albums/ah17/Sharephotos2658/broview-v8-photo-3_zpsiemgw338.jpg~original http://i1376.photobucket.com/albums/ah17/Sharephotos2658/broview-v8-photo-5_zpsliwggkwh.jpg~original http://i1376.photobucket.com/albums/ah17/Sharephotos2658/broview-v8-photo-7_zpsgxuucral.jpg~original http://i1376.photobucket.com/albums/ah17/Sharephotos2658/broview-v8-light-cutoff-2_zps7hpaqhq6.jpg~original Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.