Jump to content
LegacyGT.com

GrimmSpeed Project Legacy GT


Recommended Posts

So i had the car about 5 days before i started digging into it(new record for me:lol:). I'm not exactly sure of what my plan is for the car right now since my girl dd's it but we'll just get started slowly and see where we go(spoken like a true in denial addict). So my girl was in florida for the last 4 days so i figure i'd dig into while she was gone and not tell her i did anything to see if she notices :icon_evil

 

First we'll do the easy thing, rip the stupid airbox silencer out. I could immediately hear the turbo spool sound more clearly after doing this. At first i left the ram air piece out and i thought that once i put it back on the turbo noise would quiet down but i was surprised that it still stay about the same. Also i noticed the previos owner had a perrin foam filter in there...it was full of oil so the next thing i did was go grab some MAF cleaner and cleaned off all the oil from the filter off the the MAF sensor....the maf cleaner can says i can game 15hp from cleaning my maf, my butt dynos says i gained about this on the legacy lol.

 

 

http://www.grimmspeed.com/LegacyGT/images/silencer_delete_1.jpg

 

http://www.grimmspeed.com/LegacyGT/images/silencer_delete_2.jpg

 

of course, said car....

http://www.grimmspeed.com/LegacyGT/first_shots_1.jpg

 

 

Next on the chopping block, get some datalogging and tuning down via engintuity.

 

Justin

Link to comment
Share on other sites

  • 1 month later...

What, no PnP Exhaust Manifold w-HiFlow Crosspipe??? :)

 

I'm wathing this thread M-Grim since I'm in a conflict of choice between steel headers or ur PnP Exh-Mani w/ HiFlow-Cross. Peanut Butter & Choc; manfifold good for heat vs. Bent steel for flow.

 

Lemme know if u see a big diff when/if u get one on. Good luck in Mn, winter's almost over, right ;)

Link to comment
Share on other sites

Yeah - we beat up the silencer box removal within weeks of the car's arrival. I want to see some more in-depth mods!

 

I say that because I'm about to be "forced" into a massive upgrade (second stock turbo dying) which will be built around a FP Green. I already have some Grimmspeed goodies bookmarked to be part of the plan :D

Link to comment
Share on other sites

WTF? tweekdout stole my avatar?!?!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

maybe imitation IS the sincerest form of flattery

2013 S4 - Glacier White - DSG - B&O - Tech Package - Sports Diff - Napa - RS4 Grille - Stasis Exhaust - APR Intake - KW Variant 1 - Stern Control Arms - CR-15 - Stasis RSB - Moog Endlinks - PC Hyper Black Peelers - Deval Front Lip - ECS Rear Diffuser - Carbon Imports Ducktail - ECS Mirror Caps - Relak Paddle Extensions - Autostyle Floor Mats - LED Interior - V1 - Blackvue DR900s -

 

[sIGPIC][/sIGPIC]

Link to comment
Share on other sites

What, no PnP Exhaust Manifold w-HiFlow Crosspipe??? :)

 

I'm wathing this thread M-Grim since I'm in a conflict of choice between steel headers or ur PnP Exh-Mani w/ HiFlow-Cross. Peanut Butter & Choc; manfifold good for heat vs. Bent steel for flow.

 

Lemme know if u see a big diff when/if u get one on. Good luck in Mn, winter's almost over, right ;)

 

 

you are 2 years behind the curve, we want more p&p headers w/ grimmspeed ewg on the project lgt :)

 

 

 

lol yeah yeah i know. mr impreza L has been getting all my attention lately because i've been beating him up then needing to fix him....example...

 

http://www.grimmspeed.com/project_l/tonka_jump_4.jpg

 

http://www.grimmspeed.com/project_l/tonka_jump_3.jpg

 

 

Justin

www.grimmspeed.com

Link to comment
Share on other sites

lol yeah yeah i know. mr impreza L has been getting all my attention lately because i've been beating him up then needing to fix him....example...

Yeah, is that firing on all cylenders again yet?

Apparently large amounts of snow in engine bay=bad.

 

 

http://www.thecarthing.com/cp9a6m/dayofshenanigans/resized/DSC0675.JPG:lol:

Link to comment
Share on other sites

lol yeah yeah i know. mr impreza L has been getting all my attention lately because i've been beating him up then needing to fix him....example...

 

http://www.grimmspeed.com/project_l/tonka_jump_4.jpg

 

http://www.grimmspeed.com/project_l/tonka_jump_3.jpg

 

 

Justin

www.grimmspeed.com

 

How the hell did you do that?!?:eek::confused:

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

Terms of Use