Wittyfull Posted June 8, 2014 Share Posted June 8, 2014 I just finished installing my Bilstein BTS suspension on my Outback. After fastening the top of the strut assembly to the body, I had to push the eyelet at the bottom of the assembly towards the front of the car to align it with the hole in the suspension arm. Is this normal? Are the rear struts directional in that there is an inside facing side and an outside facing side? Thanks, David Link to comment Share on other sites More sharing options...
AZP Installs Posted June 9, 2014 Share Posted June 9, 2014 I just finished installing my Bilstein BTS suspension on my Outback. After fastening the top of the strut assembly to the body, I had to push the eyelet at the bottom of the assembly towards the front of the car to align it with the hole in the suspension arm. Is this normal? Are the rear struts directional in that there is an inside facing side and an outside facing side? Thanks, David The rear are not directional. -Mike Paisan http://www.pbase.com/paisan/image/153798190.jpg Maintaining, Modifying and Educating TriState Enthusiasts since 2001. Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs "Race Tested, Enthusiast Approved!" Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.