DbroLGTL Posted March 12, 2013 Share Posted March 12, 2013 SO i was going to remove the turbo to do the banjo bolt screen.. i didnt want to put the shields back on.. good or bad choice? Link to comment Share on other sites More sharing options...
angeltalin Posted March 12, 2013 Share Posted March 12, 2013 bad StageIII Cryotune-Kinugawa STS TD06H-20GTX 9 blade turbine, ID1000, DW65c, 73mm MegaMAF , GS EWG up-pipe, Downpipe and EBCS, FMS FMIC, TGV Delete, Brembo swap Link to comment Share on other sites More sharing options...
TheBlackPearl Posted March 12, 2013 Share Posted March 12, 2013 FWIW, mine didn't have a heatshield when I got it so I bought and installed one. Self proclaimed PNW Craiglist find of the day Champion, April 2014. Link to comment Share on other sites More sharing options...
Custom Trendz Inc. Posted March 12, 2013 Share Posted March 12, 2013 Its bad because it gets so hot and its right next to the intercooler. Sent from my DROID RAZR using Tapatalk 2 Link to comment Share on other sites More sharing options...
Max Capacity Posted March 12, 2013 Share Posted March 12, 2013 Don't worry, you don't need to get all the bolts back in. I think only has 2 bolts, may be 3 Use anti seize compound on all the nuts and bolts. 305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD). CHECK your oil, these cars use it. Engine Build - Click Here Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.