Jump to content
LegacyGT.com

Official Quartz Silver Metallic Thread


Recommended Posts

Yes its a hard molded plastic and I never contacted R-REV. I probably should have because there were issues with the spoiler as well (although didn't notice until after it got painted). But they were small enough issues I can live with them.

 

As for the painting I just cleaned the plastic and let it dry, then taped over the carbon fiber and spray painted.

Link to comment
Share on other sites

Yes its a hard molded plastic and I never contacted R-REV. I probably should have because there were issues with the spoiler as well (although didn't notice until after it got painted). But they were small enough issues I can live with them.

 

As for the painting I just cleaned the plastic and let it dry, then taped over the carbon fiber and spray painted.

 

I've been noticing that most grilles on cars are just plastic, so it's kinda normal, but still. What kind of spray paint did you use?

Link to comment
Share on other sites

Shot some quick cell phone pix during sunset yesterday. These moments keep reminding me 'm still very much in love with QSM (called Urban Grey Metallic here in Europe.)

 

http://www.mijnalbum.nl/Foto-JWWR3ERW-G.jpghttp://www.mijnalbum.nl/Foto-XBAFDN4A-G.jpg

 

http://www.mijnalbum.nl/Foto-PPZHGC3Z-G.jpghttp://www.mijnalbum.nl/Foto-EQX7VMJU-G.jpg

 

(Please don't mind the front wheel gap. The ground wasn't level.)

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

20532188588_9d114cfb9b_b.jpg

20532109550_84ca2823d5_b.jpg

 

 

New suspension setup:

 

JDM Spec B bilsteins all around

-Fronts on LGT specific swifts (corrects front ride height)

-Rears on OEM JDM springs (stiff like the swifts) and 3/8ths Subtle spacers/extended lugs to correct rear ride height.

Edited by mikeydrives1
Link to comment
Share on other sites

  • 2 weeks later...

I don't know why I keep using my HTC M8 when I have a great DSLR.

 

http://i.imgur.com/dzUYXzR.jpg

http://i.imgur.com/aTmtDQ7.jpg

 

18x8 45et ASA GT10 - might need to roll fenders

225/45ZR18 Continental ExtremeContact DWS 06 - enjoying the beefy look

Edited by asianrage
Link to comment
Share on other sites

  • 3 weeks later...

A friend of mine shot these pics of my car during the two day tour called 'Winding Road Challenge' we drove with 32 other Subaru's. Most of these pictures where taken at a abandoned factory in Germany. The last picture was taken at a quarry. I lowered the car on Prova springs since my last post.

 

 

http://www.mijnalbum.nl/Grotefoto-UBGQ3PE7-G.jpghttp://www.mijnalbum.nl/Grotefoto-GL3EMJRE-G.jpg

 

http://www.mijnalbum.nl/Grotefoto-6UUS38TI-G.jpghttp://www.mijnalbum.nl/Grotefoto-4BG7QJLU-G.jpg

 

http://www.mijnalbum.nl/Grotefoto-D7IZ8XQP-G.jpghttp://www.mijnalbum.nl/Grotefoto-IWPNTPB8-G.jpg

 

http://www.mijnalbum.nl/Grotefoto-7DELSTKZ-G.jpghttp://www.mijnalbum.nl/Grotefoto-MKRRAN36-G.jpg

 

http://www.mijnalbum.nl/Grotefoto-3HJINB6N-G.jpghttp://www.mijnalbum.nl/Grotefoto-7IRC3BE3-G.jpg

Link to comment
Share on other sites

A picture from a local legacy meet and one of the new TRF rear diffuser. http://images.tapatalk-cdn.com/15/10/04/d8f523051f48e2cbe874df48cc99eedc.jpghttp://images.tapatalk-cdn.com/15/10/04/bb543ef9ddfbe044b4d66f70d8151da9.jpg

 

 

Sent from a controlling box in my pocket

Edited by SpecBFan
Link to comment
Share on other sites

^ get yourself some black di-noc tape over the chrome pieces on the bottom of those tails :spin::spin:

 

car looks good though !

 

 

Thanks for the advice but I like the little but of chrome there. It compliments the side skirts, lip on my wheels and the badge trim. Just brings things together.

 

Plus since you sold your car I'm lost and don't know who to copy.

 

 

Sent from a controlling box in my pocket

Link to comment
Share on other sites

  • 2 weeks later...
A picture from a local legacy meet and one of the new TRF rear diffuser. http://images.tapatalk-cdn.com/15/10/04/d8f523051f48e2cbe874df48cc99eedc.jpghttp://images.tapatalk-cdn.com/15/10/04/bb543ef9ddfbe044b4d66f70d8151da9.jpg

 

 

Sent from a controlling box in my pocket

 

How did you make the JDM bumper vents fit? and where did you get them?

Link to comment
Share on other sites

How did you make the JDM bumper vents fit? and where did you get them?

 

 

I had to remove the bumper and trim to fit. They are not a perfect fit. I asked Arnold if he could find some for me and he came through.

 

 

Sent from a controlling box in my pocket

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

Terms of Use