flakeyblakee Posted September 13, 2007 Share Posted September 13, 2007 HELP! I have sourced all the parts for the OEM nav, but this wireharness and I have no idea where it goes too any ideas!??! http://img34.picoodle.com/img/img34/9/9/13/t_ahhhhhm_5e9650e.jpg thanks to XiiiXiii for the pic Link to comment Share on other sites More sharing options...
grbspecb Posted September 14, 2007 Share Posted September 14, 2007 that is the main wiring harness that supplies power, ground, speed signal, etc. i would try subaru parts. do a search for the service manual for the 3200 i am pretty sure i showed the pinouts and where they go. i have my nav out now asw i replaced it with the g510. i will take a closer look at the connector and see what i can find out where to get one if subaru cant help. Link to comment Share on other sites More sharing options...
MaStaMooN Posted September 14, 2007 Share Posted September 14, 2007 you have a tally of how much you spent so far for the OEM navi retrofit kit? Jon - vBGarage Profile Link to comment Share on other sites More sharing options...
flakeyblakee Posted September 14, 2007 Author Share Posted September 14, 2007 Thanks sent them an email! that is the main wiring harness that supplies power, ground, speed signal, etc. i would try subaru parts. do a search for the service manual for the 3200 i am pretty sure i showed the pinouts and where they go. i have my nav out now asw i replaced it with the g510. i will take a closer look at the connector and see what i can find out where to get one if subaru cant help. Link to comment Share on other sites More sharing options...
flakeyblakee Posted September 14, 2007 Author Share Posted September 14, 2007 ok it looks like it comes off the main wire harness which means I have to tap into the wire harness and that way more then I want to get into. So I think I'll post the items forsale Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.