New OP stage 2 tune, please look at logs

I've used smitty69 stage 2 map (Mickey's stage1 tune as a base), tweaked it a little. Overal I like it, except that knock at 40%-70% throttle. under WOT it is fine.. What did I missed (messed)? Smitty's map was for up+DP only, I have CBE and drop-in in addition.

Here is the logs and LV:

 

 

http://www.koloskov.com/temp/OP_V_2.0_11_19_08/mild1.csv

 

http://www.koloskov.com/temp/OP_V_2.0_11_19_08/mild_2.csv

 

http://www.koloskov.com/temp/OP_V_2.0_11_19_08/wot2.csv

 

http://www.koloskov.com/temp/OP_V_2.0_11_19_08/wot_1.csv

 

 

http://www.koloskov.com/temp/OP_V_2.0_11_19_08/lv_OP_1.png

 

 

It was a really cold outside, around 35F-45F..

Nobody here?

Your logging too many parameters...

Your WOT logs are clean as you mentioned. The partial throttle knock should be looked into. You need to log a 15min trip with all types of driving, WOT partial throttle and so on. You also have learned timing being pulled, this may be related to your MAF scaling being off. You should probaly ditch the panel filter until you get a wideband to monitor AFR's.

If I have MAF sensor scaling from another tune (for drop-in), can i just copy full table? is it only one table for a maf scaling, or I'll need to adjust others?

There is only one table for scaling.