Graphite675 Posted March 12, 2009 Share Posted March 12, 2009 Alright so I would like to get an after market shifter and Im curious as to if the thread size/pattern is the same on the cobb or kartboy as it is on our stock shifter--the knob im looking at is the greddy trust/grex knob that is pretty nice looking and its not terribly expensive link-- http://store.nexternal.com/shared/StoreFront/default.asp?CS=greddy&StoreType=BtoC&Count1=975704371&Count2=892844796 (select subaru under knobs which is under accessories) Looks like its only about 40 bucks..friend has one and it has a good feel (although some may not like how it gets hot and cold easily). Think this will fit on either of those shifters or the stock one? Link to comment Share on other sites More sharing options...
Spec B Posted March 12, 2009 Share Posted March 12, 2009 Aftermarket shifters are usually the same thread patters as stock...but I have no personal experience..I have the Perrin short shift kit...it retains the stock shifter. Link to comment Share on other sites More sharing options...
LGT Dave Posted March 12, 2009 Share Posted March 12, 2009 My Cobb shifter had the same thread size as the stock shifter. I'm pretty sure the Kartboy shifter does too. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.