93subie Posted July 6, 2010 Share Posted July 6, 2010 OK so I just installed my recently pulled control arm from pick 'n pull and need to know how i can get to the alignment shop. Without a tow truck. Any help? Link to comment Share on other sites More sharing options...
whos_that_guy Posted July 6, 2010 Share Posted July 6, 2010 just drive it, not gonna hurt the car if u go right to the shop Link to comment Share on other sites More sharing options...
Baddog Posted July 6, 2010 Share Posted July 6, 2010 OK so I just installed my recently pulled control arm from pick 'n pull and need to know how i can get to the alignment shop. Without a tow truck. Any help? The alignment that bad to drive it or is something else hindering it from driving? Link to comment Share on other sites More sharing options...
Reuben Posted July 6, 2010 Share Posted July 6, 2010 do an eyecrometer alignment, it'll get you to the shop just fine. I've done that at least 3 times now. If it's just the control arm, it shouldn't be out by much at all. I did a bloody steering rack and had toe within 3º by just doing it by eye.. Link to comment Share on other sites More sharing options...
93subie Posted July 6, 2010 Author Share Posted July 6, 2010 alright i'll just eyeball it. thanks guys. and no its not thats far out. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.