vodoo-chile Posted March 24, 2012 Share Posted March 24, 2012 I purchased the DDM kit about 3 years ago and have enjoyed it but I am needing to remove the kit to sell the car. I no longer have the instructions and cannot figure out how to get it back to stock? I cant tell the difference between the stock wiring and wiring harness and need some help. Are there any instructions or a link to get it back to stock bulbs? Thanks for any help, Kyle Link to comment Share on other sites More sharing options...
Drift Motion Posted March 24, 2012 Share Posted March 24, 2012 look through any HID install write up and do the reverse Link to comment Share on other sites More sharing options...
vodoo-chile Posted March 25, 2012 Author Share Posted March 25, 2012 look through any HID install write up and do the reverse I've tried but they all just say disconnect stock wiring. Not many pictures. My problem is that I can see the wires coming out of the headlight housing and going into the ballast but I can't find where the stock wiring goes to. I've got a message to Xenon Expert where I purchased them but no answer yet. Kyle Link to comment Share on other sites More sharing options...
xero287 Posted March 25, 2012 Share Posted March 25, 2012 You need new headlight housing caps Link to comment Share on other sites More sharing options...
Drift Motion Posted March 25, 2012 Share Posted March 25, 2012 take off the cap there should be a black plug with pink/white or grey color wires coming out of it, that's the OEM headlight harness, plug that back into the bulbs replace with new cap remove ballast and etc done Link to comment Share on other sites More sharing options...
xenon expert Posted March 30, 2012 Share Posted March 30, 2012 PM answered. take off the cap there should be a black plug with pink/white or grey color wires coming out of it, that's the OEM headlight harness, plug that back into the bulbs replace with new cap remove ballast and etc done ^ this Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.