PPAYER38 Posted June 6, 2012 Share Posted June 6, 2012 I'm about to buy a TS kit and I can't figure out what turbo this UP bolts to?? Guy says it is a Spec B UP but wanted some info from the LGT folks so please any info yiu have id like to hear good or bad... And please supply pictures if you have them http://i450.photobucket.com/albums/qq224/ppayer38/ForumRunner_20120606_111735.jpg http://i450.photobucket.com/albums/qq224/ppayer38/ForumRunner_20120606_111729.jpg Link to comment Share on other sites More sharing options...
Underdog Posted June 6, 2012 Share Posted June 6, 2012 Looks kind of like my OEM TS UP for a TD04HLA-19T. Although, I don't recall the three extra studs on the "ears" from ~5-7oclock. Just measured. The ports for the block/header flange of are 40mm, but immediately neck down to roughly 32mm as Unclemat suggested. It was too deep for the jaws of my caliper so I couldn't measure exactly, but 32 seems really close. The secondaries have 34mm ports. The ports on the UP are all 35mm. This matches up nicely with the inlet ports on the turbo, shown on the previous page. Pics: http://img8.imageshack.us/img8/996/primaryports.jpg http://img32.imageshack.us/img32/3809/secondaryports.jpg http://img20.imageshack.us/img20/1552/upports.jpg The Crimson Dynamo Link to comment Share on other sites More sharing options...
PPAYER38 Posted June 7, 2012 Author Share Posted June 7, 2012 Looks kind of like my OEM TS UP for a TD04HLA-19T. Although, I don't recall the three extra studs on the "ears" from ~5-7oclock. Awesome.. Thansk fro the pictures and help, I can see where the gasket/seal of the gasket was before those studs so I know I can chop them off just wanna be able to find a turbo to use this on(or atleast a turbine housing) Link to comment Share on other sites More sharing options...
fahr_side Posted June 7, 2012 Share Posted June 7, 2012 Looks like the Spec C item, at least from the photos I have of the stock parts. Obligatory '[URL="http://legacygt.com/forums/showthread.php/2008-gh8-238668.html?t=238668"]build thread[/URL]' Increased capacity to 2.7 liters, still turbo, but no longer need spark plugs. Link to comment Share on other sites More sharing options...
Guest Posted June 10, 2012 Share Posted June 10, 2012 The up/header flange says it's a twinscroll Legacy part. Indeed it has extra studs on the turbo side. It is not JDM Spec C part for sure. I'm about to buy a TS kit and I can't figure out what turbo this UP bolts to?? Guy says it is a Spec B UP but wanted some info from the LGT folks so please any info yiu have id like to hear good or bad... And please supply pictures if you have them http://i450.photobucket.com/albums/qq224/ppayer38/ForumRunner_20120606_111735.jpg http://i450.photobucket.com/albums/qq224/ppayer38/ForumRunner_20120606_111729.jpg Link to comment Share on other sites More sharing options...
LegacyDan Posted June 10, 2012 Share Posted June 10, 2012 it might be off the newer twinscroll turbo's the vf44's, its definitely not off a TD04HLA or vf36/37 turbos. what turbo does the kit come with that you are buying? TD04HLA flange for comparison: http://i32.photobucket.com/albums/d3/desperatedano/IMG_20120509_163832.jpg Link to comment Share on other sites More sharing options...
PPAYER38 Posted June 12, 2012 Author Share Posted June 12, 2012 it might be off the newer twinscroll turbo's the vf44's, its definitely not off a TD04HLA or vf36/37 turbos. what turbo does the kit come with that you are buying? TD04HLA flange for comparison: http://i32.photobucket.com/albums/d3/desperatedano/IMG_20120509_163832.jpg The kit does not include a turbo. Just the pipes, it is a local friend and we ate trying to figure it out... He wanted to use this on his new 207 swap but we noticed it was different when we got the motor and all his TS parts didn't match up. Link to comment Share on other sites More sharing options...
PPAYER38 Posted June 23, 2012 Author Share Posted June 23, 2012 Any of you have measurments from stud to stud on these turbos or uppipes?? Link to comment Share on other sites More sharing options...
mwiener2 Posted June 23, 2012 Share Posted June 23, 2012 Looks like an OEM JDM TS UpPipe to me, with studs where some bolts should be. My Mods List (Updated 8/22/17) 2005 Outback FMT Running on Electrons Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.