wrx2legacy Posted August 12, 2008 Share Posted August 12, 2008 Hey guys, Im selling a flywheel / clutch set up for 2005 legacy gt's ... The clutch is designed to fit the earlier models of the 2005/ 2006 production run... and you are going to have to reference your VIN or you can contact them and ask them to trade it out for a clutch that fits your specific model. I dont know if it will fit any models after that so please ask them for assistance. http://img.photobucket.com/albums/v474/5zigenwrx/IMG_8832.jpg The flywheel is pretty much available to fit any impreza/ legacy model after 2005 also if you have any further questions please ask ACT for assistance. fyi they are the "streelight" series or in other words "stage 1" http://img.photobucket.com/albums/v474/5zigenwrx/IMG_8835.jpg I am selling them both for only $300 cash picked up... I DO NOT want to ship these items. http://img.photobucket.com/albums/v474/5zigenwrx/IMG_8829.jpg http://img.photobucket.com/albums/v474/5zigenwrx/IMG_8830.jpg Also selling a slightly used ZEROSPORTS radiator shroud that I will let go for $50 cash picked up http://img.photobucket.com/albums/v474/5zigenwrx/IMG_8827.jpg Please EMAIL me at mykal@fakeRICH.com for any questions I am located in Westminster,CA 92683 and am willing to drive to meet for pick up if necessary. Thank you Link to comment Share on other sites More sharing options...
HansGT Posted August 12, 2008 Share Posted August 12, 2008 ACT SB2-HD00 = Torque Capacity: 304 ft/lbs? My research shows this to be for the 94-01 Impreza / 96-01 Legacy and not the current BL/BP platform. Link to comment Share on other sites More sharing options...
wrx2legacy Posted August 12, 2008 Author Share Posted August 12, 2008 ACT SB2-HD00 = Torque Capacity: 304 ft/lbs? My research shows this to be for the 94-01 Impreza / 96-01 Legacy and not the current BL/BP platform. Actually I talked to the guys at ACT about that..and they said that this is the clutch used in the early versions of the BL/BP. This is why they sent me this one... It has something to do with a VIN split midway through the production... but like I said you might want to check with them or, Im sure you could even trade it out for a newer clutch for your current application. As far as the torque rating goes... I also think that number shouldn't apply to the BL/BP applications ...then again I could be wrong this is just what I was told by an ACT representative. Link to comment Share on other sites More sharing options...
SnowBound BP5 Posted August 13, 2008 Share Posted August 13, 2008 Any installed pics of the radiator shroud? Link to comment Share on other sites More sharing options...
wrx2legacy Posted August 13, 2008 Author Share Posted August 13, 2008 Any installed pics of the radiator shroud? http://img.photobucket.com/albums/v474/5zigenwrx/engine.jpg Link to comment Share on other sites More sharing options...
edkwon Posted August 14, 2008 Share Posted August 14, 2008 http://img.photobucket.com/albums/v474/5zigenwrx/engine.jpg sent you an email about the shroud. Link to comment Share on other sites More sharing options...
spiralsmurf Posted August 17, 2008 Share Posted August 17, 2008 the flywheel alone is worth more than 300, someone should jump on this. Link to comment Share on other sites More sharing options...
SnoDork Posted August 18, 2008 Share Posted August 18, 2008 ACT SB2-HD00 = Torque Capacity: 304 ft/lbs? My research shows this to be for the 94-01 Impreza / 96-01 Legacy and not the current BL/BP platform. Yes Han's You're correct in your research. Please note: A few members have run this same exact clutch kit on their LGT. This was the ONLY ACT Kit "available/option" prior to the release of the ACT "LGT-Specific" kit. The LGT and Early Impreza/RS shared the same Clutch kit make up. The newer WRXs were different. Push vs. Pull Style. Members that have run this kit: BoxrPwr & ColatKitty (and a couple others in SoCaL), and was readily available (back in the day) from harman Motive. Thanks for your time. Bump for Mykal! ~Sucka-Duck~ Link to comment Share on other sites More sharing options...
SnoDork Posted August 18, 2008 Share Posted August 18, 2008 More Research: hi Everyone. I hope that this is not a bad time after Holidays and all but we would like to start one. People keep using about clutches and we understand that this kit (SB2-HD00) does fit the Legacy GT as confirmed by some. Se here it is: Regular price: 419 shipped 5+people price: 409 shipped 10+people price: 399 shipped Kit contains: SB-011 - Heavy Duty Pressure Plate SBSD016 - Street Disc RB833 - Release Bearing PB1004 - Pilot Bearing AT87 - Alignment Tool Torque Capacity: 304 ft/lbs. OR we have choose a kit that is also a confirmed fit: SB-011 - Heavy Duty Pressure Plate 6P224S - 6 Pad Race Disc RB833 - Release Bearing PB1004 - Pilot Bearing AT87 - Alignment Tool Torque Capacity: 401 ft/lbs. Happy New Year!!! Please order below: http://www.pltek.net/catalog/index.php?cPath=1106_21_1120 We will have several group buys going over next 2-3 months so a new section on site will be created this coming week. Let us know if you have any questions PS PLtek,llc ~Sucka-Duck~ Link to comment Share on other sites More sharing options...
wrx2legacy Posted August 18, 2008 Author Share Posted August 18, 2008 thanks for all the research guys.... Maybe all that will clear up some confusion on which application this set up will fit. Either way the flywheel alone is worth 300 and you get a free clutch, so someone email me on this. Link to comment Share on other sites More sharing options...
slug6er Posted August 18, 2008 Share Posted August 18, 2008 bump for the guy that had one of the best leggy on the board Link to comment Share on other sites More sharing options...
wrx2legacy Posted August 19, 2008 Author Share Posted August 19, 2008 SOMEBODY buy this set up !!!...and thanks for the bump / compliment slug Link to comment Share on other sites More sharing options...
FASTONE Posted August 20, 2008 Share Posted August 20, 2008 How much do you want for both, and its confirned that its will fit 05 LGT correct. Link to comment Share on other sites More sharing options...
LegacyGTBiggie Posted October 27, 2008 Share Posted October 27, 2008 where are you located? Nevermind. WHy not ship? I need a clutch... Just a littel concerned with only 304ftlbs. Will that hold a full stage 2.5 stock turbo? Link to comment Share on other sites More sharing options...
jsalicru Posted October 27, 2008 Share Posted October 27, 2008 Nice setup for sale. I drove BOXRPWRs car on several occasions and in different states of tune.. at one point his street tune had 380whp and this clutch held up well. "some say, his arms are made of coiled adamantium fibers. And that he tops his cereal with nuts and bolts. All we know is, he's called the Jose." Link to comment Share on other sites More sharing options...
LegacyGTBiggie Posted October 27, 2008 Share Posted October 27, 2008 ok so ship? Link to comment Share on other sites More sharing options...
Naylor Posted December 10, 2008 Share Posted December 10, 2008 sent you an email. Link to comment Share on other sites More sharing options...
terrangama Posted December 10, 2008 Share Posted December 10, 2008 I have boxrpwr's car now with that clutch. Everything is great engagement, pedal feel, except the clutch is retardedly stiff. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.