Jump to content
LegacyGT.com

5th Gen Legacy - Exterior Mods


Recommended Posts

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

For the pre-2013 limiteds, the shark fin antenna is black plastic - I replaced mine with a painted one from a 2013 Legacy - part number was 86321AJ72ATR for the Ice Silver Metallic one. Installation is pretty straightforward - you need to remove the headliner in the back and then can access the undo the connector and remove the nut holding the antenna in place - I replaced the nut when I did mine (parts guy didn't know if you needed to or not - I erred on the side of caution, but after doing the install, I definitely don't think it's necessary)

 

(color match is perfect - the flash from the camera makes it look lighter because of it's orientation, though)

sharkfin.jpg.afbcab4393a0b8beb817ed584c1b995d.jpg

Edited by DrD123
uploaded pic as an attachment
Link to comment
Share on other sites

  • 1 month later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 months later...
  • 4 weeks later...
  • 4 weeks later...
Hey guys, the pictures dont do it justice at all but I did the garage seal lip the other night and in person it looks amazing, it may look a little weird on the photos but its due to the screws, I need to glue some parts of the rubber together to make it look smooth and flush, here it is before the glue, ill add pics after i glue.

GetAttachment.jpg.a149aa2cc2854bca58f7656d34ec4959.jpg

Link to comment
Share on other sites

http://legacygt.com/forums/attachment.php?attachmentid=162796&stc=1&thumb=1&d=1378960544

 

Comes pre-painted from SOJ. The last two values are the color code. Exhaust covers have to be purchased seperately

 

E5617AJ150WU satin white pearl

E5617AJ030 cover (exhaust)

 

E5617AJ150RE Camellia Red Pearl

E5617AJ030 cover (exhaust)

 

E5617AJ150L5 graphite gray metallic

E5617AJ030 cover (exhaust)

 

E5617AJ150B5 Gyarakushi ~I Blue silica

E5617AJ030 cover (exhaust)

 

E5617AJ150TQ ice silver metallic

E5617AJ030 cover (exhaust)

 

E5617AJ150V2 Crystal Black Silica

E5617AJ030 cover (exhaust)

○ ○ ○

Instagram: itshangertime :spin::spin::spin: ○ ○ ○

 

Link to comment
Share on other sites

  • 1 month later...
  • 3 weeks later...
SBT,

 

Could you please go through this thread (5th Gen Legacy - Exterior Mods) and clear out the posts that are not conforming to the intent of the 5th Gen Sticky Threads.

 

Thanks,

Bob

 

All Members: If you haven't read this post, please take a moment to understand what the 5th Gen members were trying to achieve with the Sticky Threads. http://legacygt.com/forums/showpost.php?p=4335861&postcount=1

Link to comment
Share on other sites

  • 4 weeks later...
  • 1 month later...
  • 2 weeks later...
  • 3 weeks later...

I haven't seen it here yet so here goes.

 

I've noticed that Impreza's almost always run without a front plate. Some leave the bumper with the plate mount "bump", others have things that say WRX or STI on them like these:

http://perrinperformance.com/images/F74510658.jpg

http://i90.photobucket.com/albums/k251/bclaeys/License%20Delete%20-%20Forester/ImprezaPlates.jpg

 

My 13 that I bought last saturday had a front plate with holes in the bumper. I took off the dealer plates and it looked decent but the holes were visible even as a black car, so I decided to do a delete with the Impreza look and feel.

 

I looked for a delete plate that said "Legacy" on it and I couldn't find scrap.

So, I decided to make my own and came up with this:

1970951_10152278090597360_1420294276_n.jpg

 

Hope you guys like it. Go easy on me, still considered a noob around here. :redface:

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.



×
×
  • Create New...

Important Information

Terms of Use