RizzyRyan Posted February 7, 2015 Share Posted February 7, 2015 What exhaust are yall running that has the Subie growl? Link to comment Share on other sites More sharing options...
BadTrainDriver Posted February 7, 2015 Share Posted February 7, 2015 Stock. My H6 has plenty of growl! Link to comment Share on other sites More sharing options...
Frogg Posted February 8, 2015 Share Posted February 8, 2015 can't get it with the GT homie Link to comment Share on other sites More sharing options...
km580 Posted February 8, 2015 Share Posted February 8, 2015 I'm running Nameless 5" ABE Here is a clip Fat people are hard to kidnap!!! Link to comment Share on other sites More sharing options...
Conducks Posted February 8, 2015 Share Posted February 8, 2015 (edited) 2.5GT here, just removed the mufflers and put on pipes to some tips, not the classic boxer thrub but sounds like a boxer none the less Edited February 8, 2015 by Conducks Link to comment Share on other sites More sharing options...
testa422 Posted February 9, 2015 Share Posted February 9, 2015 I have an n/a 2.5. I just did custom. took out stock resonator and added MUCH smaller one for louder sound and added the right side for a dual setup with aftermarket mufflers. I will add a sound clip for you as soon as possible! Link to comment Share on other sites More sharing options...
DC_Titus Posted February 9, 2015 Share Posted February 9, 2015 I have a 2.5 N/A as well. Did a custom spring-back (not cat-back) dual exhaust with resonator delete, Magnaflow performance mufflers, and 4 1/4" tips. Has a really nice rumble. Never done a sound clip of it but if it ever stops snowing over here I can get one this week or by next weekend. Link to comment Share on other sites More sharing options...
RizzyRyan Posted February 9, 2015 Author Share Posted February 9, 2015 I'm running Nameless 5" ABE Here is a clip Thanks for that clip. I've been wondering what nameless exhaust would sound like on a GT. I had a 3.6R with muffler deletes, and it was LOUD. The sounded like a G35 on steroids. the drone was obnoxious around 1500-3000 rpm. Link to comment Share on other sites More sharing options...
BadTrainDriver Posted February 9, 2015 Share Posted February 9, 2015 I'm running Nameless 5" ABE Here is a clip Sounds like a Honda with a fart can. Link to comment Share on other sites More sharing options...
Unsp0kn Posted February 9, 2015 Share Posted February 9, 2015 (edited) GrimmSpeed donut to 3" adapter 3" Mid w/ Vibrant 1795 Resonator (stock location) 3" High Flow Y split to 2.5" Vibrant 1058 TPV Mufflers I went for the longest resonator and biggest TPV mufflers Vibrant makes and had the exhaust fabbed up at Speed-O-Motive. I love the sound, will make another video if I go stage 2 with a catless Invidia. [ame=http://www.youtube.com/watch?v=V6ySjltcJCo]Youtube - 2011 Subaru Legacy 2.5GT 3" Catback Exhaust Vibrant[/ame] You won't get any growl or rumble like a 4th gen, our header setup is equal length so we are going to forever and always sound similar to an EVO. I actually really like how mine sounds, got to hear it drive off for the first time the other day and it sounded amazing. Edited February 9, 2015 by Unsp0kn Link to comment Share on other sites More sharing options...
jackal8788 Posted February 10, 2015 Share Posted February 10, 2015 I've got a catless downpipe and Borla with a 3" bottle-style resonator in the mid-pipe. Very mellow, no drone - exactly what I was looking for in terms of sound. VF54 to 20G to VF54 to 18G build thread Link to comment Share on other sites More sharing options...
Unsp0kn Posted February 10, 2015 Share Posted February 10, 2015 I'm hoping if I do decide to do the DP this year sometime it won't be a whole lot louder. Link to comment Share on other sites More sharing options...
jackal8788 Posted February 11, 2015 Share Posted February 11, 2015 I'm hoping if I do decide to do the DP this year sometime it won't be a whole lot louder. Do you plan to go catted or catless? VF54 to 20G to VF54 to 18G build thread Link to comment Share on other sites More sharing options...
Unsp0kn Posted February 11, 2015 Share Posted February 11, 2015 Do you plan to go catted or catless? Catless for sure and have a pro tune done at BK in Boise. I plan on making it down there for a baseline dyno session soon, they are hooking me up on a few pulls since I will be getting a tune later on and they would like to have the numbers as well. Hoping it's mellow like yours (I haven't heard it) as mine is pretty deep and smooth right now. A little more popping is to be expected, it's already starting to more on downshifting as I've got about 250mi on the new mufflers. Link to comment Share on other sites More sharing options...
Perscitus Posted February 11, 2015 Share Posted February 11, 2015 Unsp0kn - that LGT exhaust sounds great! Prime choice components too. Love it. Here is my H6 contribution to the thread: - RAPTOR EZ36D SS headers (2.25" ID) - AMR/AUTOMASTER custom header-back Catted SS mid-pipe with SS flex coupler (re-using stock cats in stock locations but with 2.25->2.5->3.0" ID) - VIBRANT UltraQuiet 1142 Resonator (3.0" ID) - MAGNAFLOW 16377 Catback Exhaust (3.0" ID) (warm start and some throttle) (WOT pull from 12 sec) Link to comment Share on other sites More sharing options...
GTEASER Posted February 11, 2015 Share Posted February 11, 2015 Nameless 5" Axlebacks - Turn it up!!! [ame=http://www.youtube.com/watch?v=Eo1tfFDfSc4]www.youtube.com/watch?v=Eo1tfFDfSc4[/ame] [ame=http://www.youtube.com/watch?v=SXWWOcTTkHs]www.youtube.com/watch?v=SXWWOcTTkHs[/ame] GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Unsp0kn Posted February 11, 2015 Share Posted February 11, 2015 Unsp0kn - that LGT exhaust sounds great! Prime choice components too. Love it. ) Thanks, I'm really happy with the way it came out. Your setup sounds great as well! Link to comment Share on other sites More sharing options...
RizzyRyan Posted February 12, 2015 Author Share Posted February 12, 2015 Is the mid-pipe part of the down-pipe? I haven't been able to find a mid-pipe for our gens. Link to comment Share on other sites More sharing options...
GTEASER Posted February 12, 2015 Share Posted February 12, 2015 There is an intermediate pipe between the downpipe and the midpipe. The intermediate pipe usually comes with all the downpipes except for the AVO DP. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
jackal8788 Posted February 12, 2015 Share Posted February 12, 2015 Is the mid-pipe part of the down-pipe? I haven't been able to find a mid-pipe for our gens. No, the midpipe isn't part downpipe. At one point, I believe there was one for sale in the Classifieds section. VF54 to 20G to VF54 to 18G build thread Link to comment Share on other sites More sharing options...
RizzyRyan Posted February 12, 2015 Author Share Posted February 12, 2015 I see so this is the down-pipe and intermediate pipe? I thought the intermediate pipe had a cat on it? http://www.rallysportdirect.com/catalog_photos/products/invidia/inv_hs10sl1dpc_1_lg.jpg Link to comment Share on other sites More sharing options...
RizzyRyan Posted February 12, 2015 Author Share Posted February 12, 2015 Nevermind i did some research and figured it out. Link to comment Share on other sites More sharing options...
Unsp0kn Posted February 12, 2015 Share Posted February 12, 2015 Yep, it goes downpipe > intermediate > mid pipe > y > axle backs. Stock the mid and y are all one piece. Link to comment Share on other sites More sharing options...
bloodwingg2 Posted April 19, 2015 Share Posted April 19, 2015 Mine is going with muffler delete. Resonator still intact Link to comment Share on other sites More sharing options...
MurderLegacy Posted April 21, 2015 Share Posted April 21, 2015 Custom Fabbed full Catback exhaust, with dual 3 Inch Pilot Racing Chrome Tips. Nice classy rumble. Not too loud, and not to quiet. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now