Lgt07 Posted July 17, 2014 Share Posted July 17, 2014 Hey guys, I'm working on a custom DRL installation and I'm needing to tap into a constant on while the ignition is engaged wire and also the overhead dome light wire. I've been searching all over trying to find electrical diagrams listing which wires are what but can't seem to find what I need so if anyone knows or has any ideas please pass them my way, thanks! Link to comment Share on other sites More sharing options...
Max Capacity Posted July 17, 2014 Share Posted July 17, 2014 http://people.csail.mit.edu/ilh/vacation/ The service manual should have it. 305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD). CHECK your oil, these cars use it. Engine Build - Click Here Link to comment Share on other sites More sharing options...
Lgt07 Posted July 17, 2014 Author Share Posted July 17, 2014 You are amazing! I'll take a look see through there, thank you Link to comment Share on other sites More sharing options...
Max Capacity Posted July 18, 2014 Share Posted July 18, 2014 AAAhhh your going to make me blush... 305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD). CHECK your oil, these cars use it. Engine Build - Click Here Link to comment Share on other sites More sharing options...
Lgt07 Posted July 18, 2014 Author Share Posted July 18, 2014 So perhaps you might know, is the 05 manual the same for the 07? Also, do you know what the heck harness this is...which I will have to attempt to post pictures of later because every piece of technology I have won't upload it currently but if you're looking into the engine bay it's the large harness on the left side next to the strut tower. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.