JJr Posted January 25, 2013 Share Posted January 25, 2013 Simple question, my fixed Whiteline 20mm RSB is 47" wide (endlink mounting points) and the OEM is 46.25" I know it's only 3/8" on each end but will this be a problem? Thx Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted January 25, 2013 Moderators Share Posted January 25, 2013 If it is a lgt fitment bar you should be fine. Any difference in geometry of the endlinks should be fixed with washers / spacers though. Add enough washers where they are needed so that the endlinks are perpendicular to the ground. "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
JJr Posted January 25, 2013 Author Share Posted January 25, 2013 Will Do! As always, thx for the help BMB. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.