SkiDaddy Posted February 15, 2006 Share Posted February 15, 2006 I'm (finally) getting around to installing me e6450 amp and have questions I haven't found addressed here. I'm running a pair of coaxial speakers in the front doors and a JL sub/enclosure in the trunk for stage 1 of this project; coaxials in the rear doors somewhere down the road. The amp is clearly marked where to attach the speaker wires across channels to get the bridged effect; is this all I need to do? I don't see any other switches like the one for bridging channel 5&6. Also, how do I hook up the RCA cables from the AM HU? The sub cables are obvious, but do I only hook up the front channel RCAs, & to which inputs on the amp? I hate to "assume". TIA. Link to comment Share on other sites More sharing options...
wcbjr Posted February 15, 2006 Share Posted February 15, 2006 No switches for bridging, just hook the sub wires up. Hook the RCA from the HU to the front RCAs on the amp, that's it. Did the amp come with a manual? I forgot what I was supposed to remember. Link to comment Share on other sites More sharing options...
SkiDaddy Posted February 16, 2006 Author Share Posted February 16, 2006 Yes, I read it when I first opened the box to inspect the amp, but didn't remember reading anything about this particular instance. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.