hogmeat Posted June 1, 2006 Share Posted June 1, 2006 (edited) This is a bolt-on exhaust, keeps stock hanger locations, and even keeps the stock tips! This is what makes it so inexpensive!! Makes it completely stock looking, but unleashes a ton of that boxer rumble at idle, and turns into a tame roar when you floor it. A few backfires and pops always accompany it. I won't release the price of this yet - i'd like to hear your opinions first. But I'll say one thing...You think cat-backs that cost several hundred were crazy? So did I. This is something that will NOT hurt your wallet!! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Edited by request to put all vids in the 1st post: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Vids no longer work; check out Youtube! http://www.youtube.com/results?search_query=hogzaust&search_type=&aq=0&oq=hogza ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Edited by request to spill the beans: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ All that was done was to purchase 8 3/8" washers from a hardware store. Remove 2 bolts and nuts from muffler flange, remove gasket, put 2 washers on each bolt inbetween the flanges, and tighten nut back down. This creates a 1/4" gap - and this was all that was done to create your very own hogzaust. Enjoy!! Let me know what you all think!! Edited December 11, 2012 by hogmeat I'm pleasantly surprised... It was most certainly worth the couple bucks and 10 mins of my time. CLICK HERE FOR THE HOGZAUST Link to comment Share on other sites More sharing options...
hogmeat Posted June 1, 2006 Author Share Posted June 1, 2006 Be sure to turn it up so you can hear the rumble!! I'm pleasantly surprised... It was most certainly worth the couple bucks and 10 mins of my time. CLICK HERE FOR THE HOGZAUST Link to comment Share on other sites More sharing options...
Tide Posted June 1, 2006 Share Posted June 1, 2006 How long have you been here and you can't find the right forum to post in? Link to comment Share on other sites More sharing options...
jim1969 Posted June 1, 2006 Share Posted June 1, 2006 Link to comment Share on other sites More sharing options...
Gire Posted June 1, 2006 Share Posted June 1, 2006 Owned!!! Link to comment Share on other sites More sharing options...
hogmeat Posted June 1, 2006 Author Share Posted June 1, 2006 Sure - this is on a Turbo Motor - but why couldn't a 2.5i work just as well?? grrr.... I'm pleasantly surprised... It was most certainly worth the couple bucks and 10 mins of my time. CLICK HERE FOR THE HOGZAUST Link to comment Share on other sites More sharing options...
sutter2k Posted June 1, 2006 Share Posted June 1, 2006 Can I buy just the cans? And do they have a wider diameter fitting to bolt up better to my perrin y-pipe? Matt Link to comment Share on other sites More sharing options...
foghat Posted June 1, 2006 Share Posted June 1, 2006 Sounds nice. I'll just be here reading a magazine in the other room until you can give us anymore info. Link to comment Share on other sites More sharing options...
hogmeat Posted June 1, 2006 Author Share Posted June 1, 2006 Sounds nice. I'll just be here reading a magazine in the other room until you can give us anymore info. I'll get you plenty more info shortly - just wanted to let some people give their opinions! I'm pleasantly surprised... It was most certainly worth the couple bucks and 10 mins of my time. CLICK HERE FOR THE HOGZAUST Link to comment Share on other sites More sharing options...
mbacis Posted June 1, 2006 Share Posted June 1, 2006 Will it at least pull the stock tips up into the cutouts better? Link to comment Share on other sites More sharing options...
powbmps Posted June 1, 2006 Share Posted June 1, 2006 I would be interested. I can't quite justify $800+ (to my wife at least) for an exhaust. Link to comment Share on other sites More sharing options...
hogmeat Posted June 1, 2006 Author Share Posted June 1, 2006 Will it at least pull the stock tips up into the cutouts better? Honestly - I noticed little difference. I'll show you pics soon! check back! I'm pleasantly surprised... It was most certainly worth the couple bucks and 10 mins of my time. CLICK HERE FOR THE HOGZAUST Link to comment Share on other sites More sharing options...
hogmeat Posted June 1, 2006 Author Share Posted June 1, 2006 I would be interested. I can't quite justify $800+ (to my wife at least) for an exhaust. I couldn't either - and you won't have too! The expense really is minimal. I will be allowed to tell you tomorrow! It really is a bargin for what you get! I'm pleasantly surprised... It was most certainly worth the couple bucks and 10 mins of my time. CLICK HERE FOR THE HOGZAUST Link to comment Share on other sites More sharing options...
HungHing88 Posted June 1, 2006 Share Posted June 1, 2006 post pics man!! without pics is worthlesss nice exhuast clip!! peace Link to comment Share on other sites More sharing options...
NewScooby Posted June 1, 2006 Share Posted June 1, 2006 Link to comment Share on other sites More sharing options...
ronburgandy21 Posted June 1, 2006 Share Posted June 1, 2006 subscribed Link to comment Share on other sites More sharing options...
IAHAWK Posted June 1, 2006 Share Posted June 1, 2006 :lol: HA...you finally put a thread up on this. Link to comment Share on other sites More sharing options...
Guest *Jedimaster* Posted June 1, 2006 Share Posted June 1, 2006 Yeah, so what's the price? Link to comment Share on other sites More sharing options...
IAHAWK Posted June 1, 2006 Share Posted June 1, 2006 Jedi, don't you have an exhaust mod done to your car? Link to comment Share on other sites More sharing options...
svx6 Posted June 1, 2006 Share Posted June 1, 2006 :munch:I like it. Would need to see pics and get a sense for how loud it really is in the car... Link to comment Share on other sites More sharing options...
RobE Posted June 1, 2006 Share Posted June 1, 2006 Can't wait to find out more info. http://newenglandsubarus.com/ Link to comment Share on other sites More sharing options...
jsalicru Posted June 1, 2006 Share Posted June 1, 2006 this is almost like Ryan Seacrest... "some say, his arms are made of coiled adamantium fibers. And that he tops his cereal with nuts and bolts. All we know is, he's called the Jose." Link to comment Share on other sites More sharing options...
eL GaTo Posted June 1, 2006 Share Posted June 1, 2006 I didn't think that a hole in your cat converter would sound that good:lol::lol:. "Remember..."MODDING is a HOBBY:icon_bigg, not a BAAAD HABIT";) . Link to comment Share on other sites More sharing options...
trohler Posted June 1, 2006 Share Posted June 1, 2006 Sure - this is on a Turbo Motor - but why couldn't a 2.5i work just as well?? grrr.... so this may work on the NA cars?? can you provide pipe sizes, also is this a cat back or just axle back?? Looking for something that might be a little different than my Borla since i loose a lot of the boxer sound with the factory equal lenght headers. Tolly 07 Impreza 2.5i Special Edition 07 Kawasaki Ninja 250 Link to comment Share on other sites More sharing options...
mccorry Posted June 1, 2006 Share Posted June 1, 2006 hogger... if you're gonna sell these.... time for vendor status? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now