GTEASER Posted August 8, 2014 Share Posted August 8, 2014 Front struts no, rear shocks yes. All four springs, yes, but it is unknown as far as the results of how far the car will be lowered. Exhaust yes if its from a sedan, not a hatch, but the midpipe will need to be lengthened by about 8 inches. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Adio Posted August 8, 2014 Share Posted August 8, 2014 Axle back from a hatchback? Link to comment Share on other sites More sharing options...
GTEASER Posted August 8, 2014 Share Posted August 8, 2014 No. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Gen5is Posted August 11, 2014 Share Posted August 11, 2014 Will anything from a Gen 6 fit our Gen 5s? Link to comment Share on other sites More sharing options...
7soobs Posted August 11, 2014 Share Posted August 11, 2014 Solved! I saw a '15 WRX the other day, and noticed his crank pulley LOOKED just like ours. I then saw that Perrin has one for the '15 WRX, but doesn't list one for '10-'12 LGT. I asked, and just got a reply. "...The PERRIN PSP-ENG-101 crank pulley will work on your Legacy just fine. We just don't have an application for that car on our website yet..." Link to comment Share on other sites More sharing options...
7soobs Posted August 11, 2014 Share Posted August 11, 2014 I think this should also mean that if anyone else makes one for an NA '12-14 Impreza or the '15 WRX, or the '13+ BRZ, that would work too (that's the application for the Perrin). Link to comment Share on other sites More sharing options...
GTEASER Posted August 11, 2014 Share Posted August 11, 2014 (edited) I think the one they list is the same one for the 08-14 WRX, and incorrectly shows fitment on the 15. I dont believe it will work. 10-12 LGT has a single belt, all the Imprezas up to 15 have dual. Edited August 11, 2014 by GTEASER GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Hanger Posted August 11, 2014 Share Posted August 11, 2014 Not sure where to put this, but since this the most active sticky, so here will do PCD Hub change 5x114.3 on a Gen V ○ ○ ○ Instagram: itshangertime :spin: ○ ○ ○ Link to comment Share on other sites More sharing options...
Gen5is Posted August 12, 2014 Share Posted August 12, 2014 Haha, I made that thread. I wonder though, if the Gen 6 parts can be swapped over to the Gen 5 without any major modifications like the one in my thread. Gen 6 has 114.3 hubs instead of 100. Link to comment Share on other sites More sharing options...
7soobs Posted August 16, 2014 Share Posted August 16, 2014 Solved! I saw a '15 WRX the other day, and noticed his crank pulley LOOKED just like ours. I then saw that Perrin has one for the '15 WRX, but doesn't list one for '10-'12 LGT. I asked, and just got a reply. "...The PERRIN PSP-ENG-101 crank pulley will work on your Legacy just fine. We just don't have an application for that car on our website yet..." Well, it seems someone at Perrin didn't check. The pulley is wrong in so many ways (center hole is too small, uses a dowel instead of a key, rib location way too close to engine, etc). It's going back (and I still don't think this guy at Perrin knows what he's talking about, let alone comprehending what I'm telling him). Link to comment Share on other sites More sharing options...
GTEASER Posted August 16, 2014 Share Posted August 16, 2014 (edited) I was pretty certain based on the picture that it wouldnt fit our cars. Edited August 16, 2014 by GTEASER GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
duhst Posted August 18, 2014 Share Posted August 18, 2014 Anyone know of any other years/models that I could steal from Steel Lines off of? Can't seem to find a definite answer for 2010 2.5i Link to comment Share on other sites More sharing options...
GTEASER Posted August 18, 2014 Share Posted August 18, 2014 Are you looking for stainless steel braided brake likes? GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
duhst Posted August 18, 2014 Share Posted August 18, 2014 Are you looking for stainless steel braided brake likes? Si Señor Link to comment Share on other sites More sharing options...
GTEASER Posted August 18, 2014 Share Posted August 18, 2014 (edited) Goodridge 24220 was made specifically for and fits all 5th gens, even those with Brembo upgrades. You can order them from Mike at Infamous. I hate to admit it, but that part number is committed to memory. Edited August 18, 2014 by GTEASER GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
duhst Posted August 18, 2014 Share Posted August 18, 2014 Goodridge 24220 was made specifically for and fits all 5th gens, even those with Brembo upgrades. You can order them from Mike at Infamous. I hate to admit it, but that part number is committed to memory.  Score! I'l be ordering those bad boys tomorrow! Thanks! Thinking about picking up these as well.... http://www.autoanything.com/brakes/61A5870A0A0.aspx Link to comment Share on other sites More sharing options...
GTEASER Posted August 18, 2014 Share Posted August 18, 2014 You would be better off with these. Stay away from drilled rotors, even for the street. http://www.knsbrakes.com/c/car-series/879_2010+Subaru+Legacy+Sedan+-+2.5i/187_Centric+Premium+Brake+Rotors+and+Hawk+HPS+High+Performance+Street+Brake+Pads If you have to have fancy looking rotors, do these, DBA is quality. I have the T3 on my rear Brembo upgrade. http://www.knsbrakes.com/c/car-series/879_2010+Subaru+Legacy+Sedan+-+2.5i/209_DBA+T2+Street+Series+Slotted+Brake+Rotors+and+StopTech+Street+Performance+Brake+Pads GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
pfoyle Posted August 22, 2014 Share Posted August 22, 2014 So I know it's known that brakes from '08+ WRX/STi are direct bolt-ons for our cars... but has anybody confirmed this to be true for the new generation of WRX/STi? 2015s especially? Thanks! Link to comment Share on other sites More sharing options...
proflashrtist Posted September 5, 2014 Share Posted September 5, 2014 What fits my limited 08 LGT? Link to comment Share on other sites More sharing options...
SpidermanMTL Posted September 5, 2014 Share Posted September 5, 2014 What fits my limited 08 LGT?  Epic Post... MY BUILD TAKE 2 : http://legacygt.com/forums/showthread.php/spideys-12lgt-take-2-266018.html Link to comment Share on other sites More sharing options...
proflashrtist Posted September 5, 2014 Share Posted September 5, 2014 Hahaha Link to comment Share on other sites More sharing options...
SpidermanMTL Posted September 5, 2014 Share Posted September 5, 2014 Hahaha  You know you're in the 5th gen section right? MY BUILD TAKE 2 : http://legacygt.com/forums/showthread.php/spideys-12lgt-take-2-266018.html Link to comment Share on other sites More sharing options...
proflashrtist Posted September 5, 2014 Share Posted September 5, 2014 Which is why this is funny ...had to get my morning troll out of the way Link to comment Share on other sites More sharing options...
GTEASER Posted September 5, 2014 Share Posted September 5, 2014 The favor will be returned. Lol! GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
proflashrtist Posted September 5, 2014 Share Posted September 5, 2014 http://tapatalk.imageshack.com/v2/14/09/05/e54e6fd61875ffab50c6af2cb5bd6de5.jpg Link to comment Share on other sites More sharing options...
Recommended Posts