flickering hids

**mkellyak** · #1: 11-03-2009, 11:53 AM

i have a 2007 outback and just installed a hid conversion kit and when i turn to my drls they flicker

**GTTuner** · #2: 11-03-2009, 12:02 PM

You need to disable the DRL's or use a relay harness to get full battery voltage to the balasts.

**mkellyak** · #3: 11-03-2009, 12:29 PM

the hids work fine as long as i have the lights fully on

**mkellyak** · #4: 11-03-2009, 12:30 PM

so just disable the drl's then

**mkellyak** · #5: 11-03-2009, 12:31 PM

do i use the drl disconnect that is posted in the forum
by deerkiller

**absolutsnwbrdr** · #6: 11-03-2009, 12:34 PM

yeah do that... apparently you found it but heres a link anyway...

http://www.legacygt.com/forums/showthread.php?t=2117

then your hid's will be fine.

**absolutsnwbrdr** · #7: 11-03-2009, 12:38 PM

just realized that deerkillers walkthrough is for 05-06. for an 07 it appears to be different... maybe read here...

http://www.legacygt.com/forums/showthread.php?t=42292

see post 67

**05lgt5spd** · #8: 11-03-2009, 06:07 PM

ditch them and putt piaa's in. Hid kits never work right

**rkl303** · #9: 11-03-2009, 10:07 PM

I had to disconnect and reconnect my wiring harness at all points and apply dielectric grease as I noticed some points looked like they had some moisture signs. Also used a screw driver to make sure everything was inserted correctly. But so far its been about 6 months and no issues.

**mkellyak** · #**10:** 11-04-2009, 08:19 AM

I also put the same kits on my 08 tribeca and now the cruise control liight flashes the antiskid light is on and the check engine light is on any suggestions

**absolutsnwbrdr** · #**11:** 11-05-2009, 08:11 AM

Quote:

Originally Posted by 05lgt5spd

ditch them and putt piaa's in. Hid kits never work right

not true... i LOVE mine.. and they are the "cheap" kits. both kits- for lows and fogs- I only paid about $170 total. ballasts have lifetime warranties.

**absolutsnwbrdr** · #**12:** 11-05-2009, 08:12 AM

Quote:

Originally Posted by mkellyak

I also put the same kits on my 08 tribeca and now the cruise control liight flashes the antiskid light is on and the check engine light is on any suggestions

did you read over that one thread for the 07's? something about disconnecting 2 wires on the harness?

tribeca may be the same system, but im not sure.