stevenva Posted July 17, 2011 Share Posted July 17, 2011 http://www.scangauge.com/ I got one of these devices and wasn't sure where to mount it. The velcro they provided so you could mount it on top of the steering column was a cheesy idea. I like the pocket beneath my radio too much. (it's pretty low to keep looking down there anyway) I decided on the top of the dash area. Fiberglass was a possibility for making the housing but I found a different product that sounded promising. Its a 2 part "clay" that cures chemically. It's called Magic Sculpt. http://www.magicsculp.com/ The product I used to give it it's texture is SEM 39853 Texture Coating. http://sem.ws/Catalog.asp?prod=145 That stuff took some practice, (I never really got it the way I wanted it) I painted it with Spray Max. http://www.66autocolor.com/SprayMax_2K_Aerosol_Auto_Paint_p/spm-mix2k.htm The process goes like this: The guy at the auto body supplier took a cordless scanner to my dash, scanned it in a few spots and got an average. 5 minutes later I got a rattle can of paint. He goofed though. It's way too dark. He might have gotten the formula correct but the base he used is called Chrysler Black. I mixed paint at Lowes before and know that trying to make a black lighter is possible, but would require a lot of light pigment. The clear coat I used is SEM 13023 Low Luster Clear. http://sem.ws/Catalog.asp?prod=190 It will have the same sheen as the factory vinyl and can accept products like Armour All once cured. Anyway, I still need to repaint it to match the dash, I got the new proper paint but not the motivation. RIP 96 Legacy 2.2 4EAT lost reverse @ 374,000 miles Link to comment Share on other sites More sharing options...
I Donated broknindarkagain Posted July 17, 2011 I Donated Share Posted July 17, 2011 you're trying to mount the last pic as well, arent you -broknindarkagain My Current Project - Click Here COME AND TAKE IT "The only thing necessary for the triumph of evil is for good men to do nothing." Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.