Sublimejoe Posted August 31, 2011 Share Posted August 31, 2011 Many of you may have already seen it in my Outback XT thread but I figured I would make a new thread so I can field any questions and keep everything in one place. I just installed my Nameless Performance AxleBack on my 06 Outback XT last night and it is amazing! Nameless didn't make an OBXT part so Jason made a prototype one for me and shipped it over from Washington this week. Fit and finish are absolutely perfect and it sounds amazing. http://farm7.static.flickr.com/6193/6098765534_8c25430e0e_b.jpg A few more photos here: [ame=http://www.flickr.com/photos/docmonstereyes/sets/72157626891597001/with/6098765534/]2006 Subaru Outback XT Limited - a set on Flickr[/ame] In the photos you will see that the bolts needed to be cut off, this is only because my car was a northeastern vehicle and had a lot of rust on the undercarriage. Normally it is about a 20 minute install with only four bolts. I bought new nuts/bolts and gaskets in anticipation for lots of rust. Those parts were about $25. Here is the video: [ame=http://www.youtube.com/watch?v=WC2uBmWtJtQ]2006 Subaru Outback XT Nameless Performance AxleBack - YouTube[/ame] Link to comment Share on other sites More sharing options...
mdzowner Posted August 31, 2011 Share Posted August 31, 2011 sounds pretty sweet. Link to comment Share on other sites More sharing options...
Sublimejoe Posted August 31, 2011 Author Share Posted August 31, 2011 sounds pretty sweet. Thank you! Link to comment Share on other sites More sharing options...
Th3Franz Posted September 1, 2011 Share Posted September 1, 2011 Friend of mine just got his Nameless installed on his 2011 STI. Really wish they made a complete catback for the LGT now -Franz The end of a Legacy http://www.youtube.com/th3franz Link to comment Share on other sites More sharing options...
Sublimejoe Posted September 1, 2011 Author Share Posted September 1, 2011 I am working on it with Jason. My stock y-pipe and mid pipe look terrible now in comparison to the Nameless AxleBack. I think I will have to get a resonated mid-pipe because if I have a straight pipe + DP my car will be unreasonably loud. Link to comment Share on other sites More sharing options...
TRSCobra Posted September 1, 2011 Share Posted September 1, 2011 Those are muffler deletes, correct? Link to comment Share on other sites More sharing options...
Sublimejoe Posted September 1, 2011 Author Share Posted September 1, 2011 Those are muffler deletes, correct? You are correct sir. Link to comment Share on other sites More sharing options...
Sublimejoe Posted September 9, 2011 Author Share Posted September 9, 2011 Here is a side photo of the car with the axleback on it: http://farm7.static.flickr.com/6089/6113181566_d59b80b3e1_b.jpg Link to comment Share on other sites More sharing options...
Psychobob_XT Posted October 5, 2011 Share Posted October 5, 2011 Have you noticed any exhaust drone inside the cabine? I have just contacted Nameless Performance and they will make more of these!! Link to comment Share on other sites More sharing options...
Sublimejoe Posted October 5, 2011 Author Share Posted October 5, 2011 No sir, no drone at all. It is just ever so slightly louder than stock when just cruising around. It doesn't get really loud until you get on it. I wouldn't trade it for the world. Link to comment Share on other sites More sharing options...
fenominal Posted June 3, 2012 Share Posted June 3, 2012 I'm jumping around quite a bit here, but there aren't any newer replies here. Has Nameless put this into production? Link to comment Share on other sites More sharing options...
Rickbubello Posted November 30, 2012 Share Posted November 30, 2012 i want one of these for my 2008 outback xt manual, anyone know where i can find this, my stock exhaust looks like a little dick Link to comment Share on other sites More sharing options...
Rickbubello Posted November 30, 2012 Share Posted November 30, 2012 sounds so nice im ordering one in the next week or two Link to comment Share on other sites More sharing options...
Rickbubello Posted November 30, 2012 Share Posted November 30, 2012 did you get the legacy gt style with staight pipes or the turn down ones they make for hte obxt? yours look awesome in the top photo and sound great Link to comment Share on other sites More sharing options...
Windy Road Posted December 1, 2012 Share Posted December 1, 2012 Looking good. I was looking at this exhaust the other day. I wonder how loud it would be on my car. ELH, 3" dp with no cat, 3" mid and y pipe. Part of me likes how it is now but the other half wants it louder lol. 276hp/347tq On a DynoJet Dyno Video - Had a big lean spot as you can tell in the second pull Link to comment Share on other sites More sharing options...
washingtonOBXT Posted March 27, 2013 Share Posted March 27, 2013 I have been looking at the same exhaust, is this the muffled or unmuffled version? Link to comment Share on other sites More sharing options...
Brett Posted March 28, 2013 Share Posted March 28, 2013 unmuffled Link to comment Share on other sites More sharing options...
washingtonOBXT Posted March 28, 2013 Share Posted March 28, 2013 thanks, thats good news becasue unmuffled is cheaper, but i didnt want to go louder than his, i like my sleeper status Link to comment Share on other sites More sharing options...
DoYouWannaBuildASubie Posted June 10, 2016 Share Posted June 10, 2016 Now Im sold on getting muffler deletes. Thanks Joe!!! Also your Hella Horns. Dude how did you mount them. I recently bought Hella Supertones for my 06 Outback 3.0R and cant mount them because of this stupid hose behind the left side of my grille. Did you have any problems mounting? Do the 2.5XT owners know with hose Im talking about? How did you install your horns Joe? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.