if youve bought led blinker bulbs the you know they blink very fast, here is a mod to make em flash normal again
i used heat shrink to cove the metal leads, then wrapped it all up with electrical tape.....
these get very hot when running for a while...not melting plastic hot, just hurt your finger hot...
attach one lead to the white wire and one lead to the black and your done..
you could chose to run extra wire off these and mount them elsewhere but this is how i did it
ps not responsible for any damages that may occur using this mod, i got the mod from someone else and just did it myself,,however this is the same product that has been used for this led bulbs came out so i see no reasons for problems..enjoy