Jump to content
LegacyGT.com

FYI: GrimmSpeed 3-port BCS


BigBopper

Recommended Posts

FYI .... To those of you who are planning to build up a '10+ LGT using a Grimm Speed BCS. I found that Subaru changed out the connectors that had been used historically on the OEM Wastegate Control Solenoid's on previous Gen models. Or should I say, at least my '10 LGT was built with different OEM connectors.

 

http://i859.photobucket.com/albums/ab160/BigBopper_01/P1010003-1.jpg

 

Black connector is from my '10 OEM Wastegate Control Solenoid.

Gray connector is the connector that had been used on previous Subaru models.

 

I found that the GrimmSpeed 3-port BCS for a MazdaSpeed 3 (P/N 057028) works perfectly on my '10 LGT.

 

Thanks goes out to Mike from Infamous for helping get things sorted out with GrimmSpeed. ;)

Link to comment
Share on other sites

  • 2 weeks later...
  • 1 year later...
Thanks, that's perfect along with the video's I found on youtube. Just wanted to make sure I was heading the right direction.

Current Mileage as of 19-June-15: 15012

Purchase Date: 30-June-12

Visit my profile page (visitor message section) for a brief mod. list.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

Terms of Use