scoobydoobie Posted August 23, 2010 Share Posted August 23, 2010 Have a Rallitek 19mm RSB w/ Kartboy endlinks on my sedan. After re-tightening the endlinks, re-greasing the bushings, still get a clunk on the back left side when going over bumps. Finally figured out yesterday where its coming from, the RSB itself is hitting the subframe on bumps on the driver's side. There is like a one finger gap between RSB and sub frame on the passenger side, and a piece of paper sized gap on the driver's side. Anyone else's rallitek rsb fit like this? Also the top bushing of the Kartboy endlink on that side seems to be deformed or even coming off the endlink itself. I'll try to get a couple pics to better explain what I'm trying to say. Any ideas on fixing this (besides the obvious "buy a new rsb")? Link to comment Share on other sites More sharing options...
TSiWRX Posted August 24, 2010 Share Posted August 24, 2010 Is the RSB mount borked on one side? <-- I love Winky, my "periwinkle" (ABP) LGT! - Allen / Usual Suspect "DumboRAT" / One of the Three Stooges '16 Outback, '16 WRX, 7th Subaru Family Link to comment Share on other sites More sharing options...
scoobydoobie Posted August 24, 2010 Author Share Posted August 24, 2010 it looked ok but I will double check it tomorrow Link to comment Share on other sites More sharing options...
toreadorranger Posted August 24, 2010 Share Posted August 24, 2010 I know I had ordered two locking collars from Mcmaster car to keep the sway bar centered. 3/4" Collars are what you need. Cost me a couple dollars. Link to comment Share on other sites More sharing options...
sleeper8406 Posted August 24, 2010 Share Posted August 24, 2010 Interested to see how this works for you....I have a similar clunk but haven't investigated yet. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.