yes, it is the same ROM which I have pulled from the car and submitted here: (http://www.romraider.com/forum/topic3679.html
) with some very minor changes where I have just increased the speed limiter as a test before I start messing with anything else.
I have also tried doing a test write with an unmodified ROM and in the log, I can see that after ecuflash compares the ROM it will stop since both of the ROM are identical and say that the flash had been completed.
Initially I thought the error came up because I was in test write mode where nothing is supposed to be flashed to the ECU anyway and somehow the module did not realize that and thought it was an error so it gave out a warning. However, judging by your response my assumption is probably wrong and i was lucky that I did not go ahead and do a real flash.
oh and by the way, thank you very very much Bill for creating all the new definitions for the CANbus ROMs!!