Jump to content
LegacyGT.com

Dyno video


Recommended Posts

Here's the last pull today. It's a new VF52 on a engine with 142,600 miles. Invidia catless up/dp, stock exhaust from Dp back. Stock injectors, IPR tmic. Pulls were done in 4th gear on a Mustang Dyno.

 

20.8psi, 280whp, 300ftlbs

 

http://i185.photobucket.com/albums/x40/92Si/th_VID00018.jpg

 

http://i185.photobucket.com/albums/x40/92Si/CCF08272011_00000.jpg

305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD).  CHECK your oil, these cars use it.

 

Engine Build - Click Here

Link to comment
Share on other sites

I'll try and post up the chart later today. Get's full boost at 3700, makes about 19.5psi 3500. A/R min is 11.0 and max is 15.8, avg is 11.8

 

I don't feel the need for more hp right now with the mileage on this engine. Remember this is a DD. If I wanted more HP I would have spent the money now and did a new STI short block and bigger turbo.

 

For now, when I pull off the stop sign at the top of the hill, turn right and roll into the throttle before the car straight, at about 3/4 throttle the tires spin a little. That's enough.

305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD).  CHECK your oil, these cars use it.

 

Engine Build - Click Here

Link to comment
Share on other sites

  • 3 weeks later...

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

Terms of Use