grocery getter Posted June 4, 2009 Share Posted June 4, 2009 Anyone know if these will fit a 08 Legacy with Brembo's....these are sooo hot! http://www.avalonmotorsports.com/index.php?main_page=product_info&products_id=294 especially powder coated black! Link to comment Share on other sites More sharing options...
Aczwild Posted June 4, 2009 Share Posted June 4, 2009 Pretty sure they exist JDM'd All to hell Thanks Jimmy @ Hkc-Speed.com! RIP Coxx & Thanks Link to comment Share on other sites More sharing options...
needforsleep Posted June 4, 2009 Share Posted June 4, 2009 I have never seen these in our offsets.. but sexy wheels Link to comment Share on other sites More sharing options...
Bolksey85 Posted June 7, 2009 Share Posted June 7, 2009 22lbs for a 17in BBS? Are they cast because that seems heavy for a forged wheel. Still sexy. Not out offset (listed there anyway) I don't believe. Someone correct me if I'm wrong. Edit: reading>me. One Piece Counter Pressure Cast Wheel Link to comment Share on other sites More sharing options...
Listerine Posted June 7, 2009 Share Posted June 7, 2009 Try looking at the Rota Formula Mesh wheels, pretty much the same, cheaper and will fit. Link to comment Share on other sites More sharing options...
dudeondacouch Posted June 7, 2009 Share Posted June 7, 2009 Try looking at the Rota Formula Mesh wheels, pretty much the same, cheaper and will fit. Post of the day. Link to comment Share on other sites More sharing options...
grimbeaver Posted June 8, 2009 Share Posted June 8, 2009 IIRC, one of the JDM tuners ran these wheels (aroudn 30 offset or something?)... maybe Mines? Don't remember exactly who Link to comment Share on other sites More sharing options...
peteyjr Posted June 8, 2009 Share Posted June 8, 2009 BBS are timeless in their design Link to comment Share on other sites More sharing options...
Whatisit Posted June 8, 2009 Share Posted June 8, 2009 bbs are timeless in their design x2 Link to comment Share on other sites More sharing options...
grocery getter Posted June 8, 2009 Author Share Posted June 8, 2009 Post of the day. Your thinking of the BBS RE wheels which are Rota formula mesh the CH look similar but are more angular in the middle and don't have that step center hole look... formula mesh = BBS RE http://www.fastwrx.com/rofome.html BBS CH http://www.tirerack.com/wheels/WheelCloseUpServlet?target=wheelCloseUp&wheelMake=BBS&wheelModel=CH&wheelFinish=Bright+Silver+Paint in HOT black...yummy http://www.tirerack.com/wheels/WheelCloseUpServlet?target=wheelCloseUp&wheelMake=BBS&wheelModel=CH&wheelFinish=Black+w%2FPolished+Stainless+Lip Unlike the BBS RE wheels which are forged and weigh 19lbs for 18's these are cast which added to the weight (23lbs for a 18 inch wheel) Link to comment Share on other sites More sharing options...
robinlsb Posted June 8, 2009 Share Posted June 8, 2009 22lbs for a 17in BBS? Are they cast because that seems heavy for a forged wheel. Still sexy. Not out offset (listed there anyway) I don't believe. Someone correct me if I'm wrong. Edit: reading>me. Clearly not forged. I have BBS RJRs and they weigh just under 17lbs each. "Belief does not make truth. Evidence makes truth. And belief does not make evidence." Link to comment Share on other sites More sharing options...
S0CalGT Posted June 12, 2009 Share Posted June 12, 2009 If you're really interested in these wheels, check other car forums with a similar bolt pattern (i.e. vwvortex). CH's are pretty common with the VW community. I'm not sure if they will clear brembos, but with that low of an offset, I don't think it should be an issue. As far as people stating "not our offset", don't be held back by the norm. Just about anything is possible: http://legacygt.com/forums/showthread.php?t=71091&page=34 Link to comment Share on other sites More sharing options...
andrewsweet Posted April 3, 2010 Share Posted April 3, 2010 I'm actually going to try these wheels onto the legacy today, 18x8.5. hope they clear the fenders et35, should come out .6 inches further, suspension clearance good, overall diameter 33mm bigger, hope for the best Link to comment Share on other sites More sharing options...
legwbrembos Posted April 26, 2010 Share Posted April 26, 2010 ^So, I''m trying to order these up for myself.I want to go with 18x8.5 offset aroung 35-40. I called TireRack adn they say that there's only a an offset of 30. Where did you find your setup?Anyone else have a better online store recommendation? Link to comment Share on other sites More sharing options...
grocery getter Posted April 26, 2010 Author Share Posted April 26, 2010 ^So, I''m trying to order these up for myself. I want to go with 18x8.5 offset aroung 35-40. I called TireRack adn they say that there's only a an offset of 30. Where did you find your setup? Anyone else have a better online store recommendation? Call BBS directly. Link to comment Share on other sites More sharing options...
StoplightAssassin Posted April 26, 2010 Share Posted April 26, 2010 http://www.usarim.com/audi-wheels-sku-320-18-inch-silver-rims-with-tires-free-shipping-p-1394.html Link to comment Share on other sites More sharing options...
CDN 2.5i Posted March 9, 2011 Share Posted March 9, 2011 See the Sonic Tuning ST100 wheels - they're a BBS CH rep at a much more affordable price. The ST100s have been getting good reviews and there's even a couple of LGT members with them, just haven't seen any pics yet. I'm interested in getting a set in 17" in gunmetal (or perhaps the Sonic Tuning ST8). See http://legacygt.com/forums/showthread.php/gi-17-wheels-sonic-tuningi-need-10-buyers-deposits-157335.html for more detail. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.