seishowtime Posted May 1, 2014 Share Posted May 1, 2014 (edited) Hi Guys, Thought I would post up my current car and build. I've got a 2003 White Birch Legacy GT Limited Wagon "STI swapped" . Check out the build. all comments & critiques welcome! http://i1291.photobucket.com/albums/b550/seishowtime/Legacy/IMG_4577_zpsazbcutcz.jpg Before: http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/051_zpsxkpxomws.jpg Now: http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/060_zpsnbmbzlxl.jpg Heres my parts list and a couple pics. I will update as I go along. Comments and critiques are welcome! Thanks! Currently installed parts: Engine: 04 Forester XT EJ255 STi VF-48 Turbo STi Top Mount intercooler and OEM BOV STi SG9 Alternator cover plate STi Radiator Cap SPT Intake Koyo Aluminum Radiator Perrin Equal Length Headers Custom 304SS 3" Exhaust w/ Vibrant Performance Resonator and Muffler Perrin Turbo Inlet Hose GrimmSpeed Uppipe GrimmSpeed Divorced Wastegate Downpipe GrimmSpeed Turbo Heat Shield GrimmSpeed EBC Crawford Performance AOS DEI Reflect-A-Gold tape Beatrush/Laile Crank and Alternator Pulleys Cobb AccessPort V3 Walbro Fuel Pump Drivetrain: 06 WRX 5-Speed (3.70 Final drive ratio) Kartboy Short shifter and Bushing Combo Suspension/Handling: STi S401 Bilstein Suspension STi Steering Rack WRX Wide track front WRX Cusco H-Brace WRX Perrin front sway bar STi BH5 Pink Springs Exterior: JDM BH5 Wagon Rear Bumper JDM BH5 Legacy Scooped Hood type D JDM BH5 Type-D HID Headlights w/ auto-leveler JDM SAA Custom Clear Taillights JDM B4 RSK front bumper w/ Lip kit Interior: STi Duracon 5spd Shift knob STi Genome Boost Gauge and Defi Controller STi S401 Steering Wheel Pioneer AVHX8500BHS double-DIN Multimedia receiver Underseat Subwoofer Legacy center dash trim with cup holder Wheels/ Brakes: STi Valve Stem caps JDM STi Rays RS-Zero option wheels 18x7.5 (summer) To Do List: JDM interior conversion STi Carbon Kickplates WRX 4-pot brake conversion BH5 Aero Guard set (need to paint & install) JDM BH5 Side skirts (need to install) ALL the Beatrush gold goodies Edited September 18, 2016 by seishowtime too many mods! Link to comment Share on other sites More sharing options...
seishowtime Posted May 1, 2014 Author Share Posted May 1, 2014 http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/015_zps81656dcc.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/028_zps26a2c8d3.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/045_zps3b4f5ef3.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/035_zps49ad3c69.jpg Link to comment Share on other sites More sharing options...
seishowtime Posted May 1, 2014 Author Share Posted May 1, 2014 http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/006_zps6c829822.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/005_zpsf2905c15.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/004_zps62d20950.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/002_zpse6fa1859.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/001_zpsac28000c.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/134_zpsee7a9ecf.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/130_zps9b2b6e77.jpg Link to comment Share on other sites More sharing options...
seishowtime Posted May 1, 2014 Author Share Posted May 1, 2014 http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/001_zps8ccb3c60.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/002_zpsde728dc8.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/004_zps03aa2645.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/005_zpsc16fa422.jpg Link to comment Share on other sites More sharing options...
Leeson187 Posted May 1, 2014 Share Posted May 1, 2014 Could you please post a video with the exhaust sound? I'd like to hear how it sounds? Link to comment Share on other sites More sharing options...
yaya20 Posted May 2, 2014 Share Posted May 2, 2014 Nice. Interested to see this progress. Link to comment Share on other sites More sharing options...
seishowtime Posted May 2, 2014 Author Share Posted May 2, 2014 The exhaust is all stock other than the STi Genome axle back. There is a slight 'chirp' and 'leaking' sound in the exhaust because part of my baffling in the muffler is split (something the pictures on ebay did not represent). Otherwise it is a very toned down exhaust. It's very quiet while driving around and has a bassy tone. http://s1291.photobucket.com/user/seishowtime/media/Legacy%20Parts/002_zps807f9815.mp4.html Link to comment Share on other sites More sharing options...
Leeson187 Posted May 2, 2014 Share Posted May 2, 2014 You gunna post pics with the BBS? What size are theses? Link to comment Share on other sites More sharing options...
seishowtime Posted May 2, 2014 Author Share Posted May 2, 2014 You gunna post pics with the BBS? What size are theses? The BBS wheels don't have tires yet and two of them need a little refinishing. I think I might change the color as well. They are 17x7s. I will definitely post them up when I get rubber on them! Link to comment Share on other sites More sharing options...
Alpine F31 Posted May 2, 2014 Share Posted May 2, 2014 Nice! I truly like all of your choices so far! Link to comment Share on other sites More sharing options...
soba noodle Posted May 5, 2014 Share Posted May 5, 2014 That Genome muffler looks a bit short, sedan version? Got disappointed with Genomes, not sure what all the buzz is about - very light (which is not bad) but so easy to dent/scratch, pipework is not even 2.5", sound-wise I'd say each to their own. Sold mine after a month Link to comment Share on other sites More sharing options...
seishowtime Posted May 5, 2014 Author Share Posted May 5, 2014 That Genome muffler looks a bit short, sedan version? Got disappointed with Genomes, not sure what all the buzz is about - very light (which is not bad) but so easy to dent/scratch, pipework is not even 2.5", sound-wise I'd say each to their own. Sold mine after a month Nah, the USDM bumpers are 2-3inches longer than the jdm ones. Link to comment Share on other sites More sharing options...
LibertyFLS Posted May 6, 2014 Share Posted May 6, 2014 Nice work, look forward to following this thread! Link to comment Share on other sites More sharing options...
seishowtime Posted May 8, 2014 Author Share Posted May 8, 2014 some more JDM goodness! One down, three to go! http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/023_zps7c1da4b6.jpg Link to comment Share on other sites More sharing options...
Leeson187 Posted May 16, 2014 Share Posted May 16, 2014 Ya BBS RGRs? I have those same set. How much did it run ya? Waiting to see me with shoes. Link to comment Share on other sites More sharing options...
Leeson187 Posted May 16, 2014 Share Posted May 16, 2014 Ya BBS RGRs? I have those same set. How much did it run ya? Waiting to see em with shoes. Link to comment Share on other sites More sharing options...
seishowtime Posted June 2, 2014 Author Share Posted June 2, 2014 Finally got the full set of center caps for my STI BBS RG345s! Brand spankin new! http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/0282_zps466f8005.jpg Link to comment Share on other sites More sharing options...
seishowtime Posted June 12, 2014 Author Share Posted June 12, 2014 Got a few more things in the mail today! GrimmSpeed Turbo Heat shield http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/009_zps9950e6dc.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/006_zpseb8b164d.jpg Wrapped the inside of it in DEI Reflect-A-Gold tape for some heat containment. Don't mind the Instagram filter. http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/008_zps040edbb5.jpg Link to comment Share on other sites More sharing options...
seishowtime Posted June 12, 2014 Author Share Posted June 12, 2014 lil bit of Beatrush goodness. http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/012_zps8bf518af.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/014_zps47a3215c.jpg Link to comment Share on other sites More sharing options...
seishowtime Posted June 12, 2014 Author Share Posted June 12, 2014 annnnnnd a perrin turbo inlet tube http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/016_zpsa1902183.jpg Link to comment Share on other sites More sharing options...
rkrenicki Posted June 12, 2014 Share Posted June 12, 2014 Just so you know, the Japanese door cards will work for your rear and front right doors. The front left (driver door here) does not have a hole large enough for the switch panel. In the US, both front doors have the large switch panel. In other countries, only the driver position has it. Link to comment Share on other sites More sharing options...
seishowtime Posted June 12, 2014 Author Share Posted June 12, 2014 Just so you know, the Japanese door cards will work for your rear and front right doors. The front left (driver door here) does not have a hole large enough for the switch panel. In the US, both front doors have the large switch panel. In other countries, only the driver position has it. Yeah, when I have my interior redone, I am going to dismantle the cards and paint the drivers to match the rest. Little bit of an oops and I dont get why subaru decided to make them that way but i'll make it work. Link to comment Share on other sites More sharing options...
seishowtime Posted June 17, 2014 Author Share Posted June 17, 2014 Huzzah! After many lost auctions I final scooped up a set! Discontinued STI RAYS RS-Zero Carbon and Aluminum Center Caps!! http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/017_zps245ceff7.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/e77fde60-1e80-4961-9a5d-8ba057c28036_zps69959566.jpg http://i1291.photobucket.com/albums/b550/seishowtime/Legacy%20Parts/013_zps54f5d150.jpg Link to comment Share on other sites More sharing options...
Stewart02 Posted June 18, 2014 Share Posted June 18, 2014 Where are you finding all these rad parts? Link to comment Share on other sites More sharing options...
LibertyFLS Posted June 18, 2014 Share Posted June 18, 2014 so how are you doing a turbo setup? Looks like this is going to be an epic build when it's done! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now